Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Harry Ferguson Tractors Discussion Forum
:

Speaking of Cordwood saw

Welcome Guest, Log in or Register
Author 
John (Ont)

06-26-2007 16:05:59




Report to Moderator

I recently picked up a homemade cordwood saw at auction and would like to know at what rpm the blade should turn. It has a 26" blade on now but will take up to a 30" blade.
John(Ont)




[Log in to Reply]   [No Email]
Bob (Aust)

06-26-2007 16:17:30




Report to Moderator
 Re: Speaking of Cordwood saw in reply to John (Ont), 06-26-2007 16:05:59  
Engine Speed: 1500 RPM; PTO Speed 545 RPM; Pulley Speed 1018 RPM; Belt Speed 2399 RPM.

Engine Speed: 2000 RPM; PTO Speed 727 RPM; Pulley Speed 1356 RPM; Belt Speed 3190 RPM.

There are two models of the PTO belt drive, 8 inch and 8.5 inch. That will affect blade rotation speed.

From the Feruson implement book: �The saw is run at 1200 RPM which means an engine setting of � throttle.�



[Log in to Reply]  [No Email]
steveormary

06-28-2007 21:14:07




Report to Moderator
 Re: Speaking of Cordwood saw in reply to Bob (Aust), 06-26-2007 16:17:30  
Bob,seems that 3/4 throttle would give you alot more then 1200 rpm. Also,shouldnt your belt speed be in FPM?

steveormary



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy