Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

TO30 Engine Plate

Welcome Guest, Log in or Register
Author 
James E. Siler

11-21-2000 19:27:53




Report to Moderator

I have restored my 1952 Ferguson and need a new(reproduction engine plate) I have the old one but it was damaged at the machine shop when they used a chisel to remove it before the put the block in the hot tank!!! I would like to have one made just like the original and install it so no one would ever know. This one needs to be from Detroit rather than from England naturally. Do any of you know of someone that would reproduce this for me?? Your help would be appreciated. Thanks: Greasy Fingers

[Log in to Reply]   [No Email]
Paul in NM

11-22-2000 12:23:12




Report to Moderator
 Re: TO30 Engine Plate in reply to James E. Siler, 11-21-2000 19:27:53  
James - contact K & A Graphics, PO Box 240, Mason City, IA 50402-0240, (515) 424-2535. They have made Detroit-built Continental engine SN plates for me and they do a fine job.

Paul Nelson
Las Cruces, NM



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy