Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Harry Ferguson Tractors Discussion Forum
:

new front tire - how big a job?

Welcome Guest, Log in or Register
Author 
gshadel

07-10-2006 13:17:15




Report to Moderator

I have old, crack-ridden front tires on my TO that won't hold air for more than a few days. I bought new tubes earlier this Spring, but have not installed them yet. I see some new 4X19 tires coming up in an action in a couple weeks.. I'm thinking of trying to replace the tube and tires myself... maybe paint the rims while I'm at it.

How hard a job is it to change tubes & tires? I don't have a tire changer station, tire spoons or any special tools. I do have a bunch of prybars, hammers, etc., will power, and an extensive vocabulary of explicative 4 letter words.

I remember "back in my Army days" I used to change tires on my Army truck along the side of the road with a sledge hammer, pick/maddock, a couple prybars, and a pound or two of sweat. I hate paying someone money to mount tires if I can do it.

thanks,
George

[Log in to Reply]   [No Email]
Mike Hornberger

07-11-2006 07:36:20




Report to Moderator
 Re: new front tire - how big a job? in reply to gshadel, 07-10-2006 13:17:15  
We used to break the seal on the old tire by laying it down flat on the ground and then driving a pick-up truck over the rubber. I second what Gerald J. says about being careful with the new tube. Also, make sure when you start putting air in that there are no wrinkles and that the stem is sticking straight out. I've fixed lots of tubes with the same tools you mentioned.



[Log in to Reply]  [No Email]
Gerald J.

07-10-2006 16:54:18




Report to Moderator
 Re: new front tire - how big a job? in reply to gshadel, 07-10-2006 13:17:15  
You need something to break the beads. Tires that have been on rims long enough to crack badly tend to have melded with the rims making them hard to separate.

You have to squeeze a bead to the drop center of the rim to pull it over the rim on the opposite side.

Your pry bars will work for disassembly but will pinch the tubes with their sharp corners while reassembling. You will ruin many tubes that way. Tire irons are smoother but you can easily pinch tubes with them or with the tires.

You need to put some air into the tubes to keep them from getting pinched by the tires while getting the tires on the rims.

What you save on labor ($12 to mount a tire with tube around here) you may make up on buying extra tubes.

Since you haven't changed tires with tubes before, it would be worth at least that $12 to see it done a time or two.

Gerald J.

[Log in to Reply]  [No Email]
Jerry/MT

07-10-2006 13:33:09




Report to Moderator
 Re: new front tire - how big a job? in reply to gshadel, 07-10-2006 13:17:15  
Sounds like you have all the tools to change your tires out! Seriously, you can always try to do it and if you can't you can take them to a tire shop. You haven't lost anything but your time and the only risk your taking is that you might start the tires on fire with a hot temper and a firey tongue!



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy