Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Harry Ferguson Tractors Discussion Forum
:

TEA 20 muffler shield dimensions

Welcome Guest, Log in or Register
Author 
chuck130

06-30-2006 04:17:56




Report to Moderator

My muffler heat shield (the one that attaches directly to the muffler) is totally rusted away at the aft end. Anyone know what the total length of the shield is? Additionally, is the aft end shaped the same as the forward end, that is, rounded? Also, is the aft end attached as is the forward end? Thankyou.




[Log in to Reply]   [No Email]
John (UK)

06-30-2006 05:06:04




Report to Moderator
 Re: TEA 20 muffler shield dimensions in reply to chuck130, 06-30-2006 04:17:56  
The rear end is just cut square unlike the front end. The rear end is attached to the silencer with a band wrapped around the silencer and the shield. the front end was attached to the down pipe, half the Clamp was in the shield and the other half was attached to that with 2 setscrews to make up the complete clamp. If you need a picture of the whole thing, just email me and I will send the picture from the parts list. Total length of the shield, no idea, but it looks about the same length as the silencer.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy