Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Harry Ferguson Tractors Discussion Forum
:

tourque spec.

Welcome Guest, Log in or Register
Author 
michael in CT

10-29-2005 15:39:20




Report to Moderator

could someone please tell me tourque spec. on main & rod brg. for a 1951 to20 z120 motor. thanks mike




[Log in to Reply]   [No Email]
Little Dave

10-30-2005 20:33:48




Report to Moderator
 Re: tourque spec. in reply to michael in CT, 10-29-2005 15:39:20  
My book says 40-45 ft.lb. on the rods and 85-95 ft.lb. on the mains.



[Log in to Reply]  [No Email]
gerard

10-30-2005 01:13:21




Report to Moderator
 Re: tourque spec. in reply to michael in CT, 10-29-2005 15:39:20  
mains: 85-90 lbsft b/e 40-45lbsft.



[Log in to Reply]  [No Email]
gerard

10-30-2005 01:18:44




Report to Moderator
 Re: tourque spec. in reply to gerard, 10-30-2005 01:13:21  
Further to my previous post, figures came from service manual. Have to say 85/90 seems high - anyone confirm or correct those figures?



[Log in to Reply]  [No Email]
John (UK)

10-31-2005 10:51:33




Report to Moderator
 Re: tourque spec. in reply to gerard, 10-30-2005 01:18:44  
I have those figures too Gerard.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy