Spent most of the day Saturday prep'ing and re-seeding an old beat-down horse pasture. Used my 3 PT subsoiler quite a bit. I hit a few BIG rocks (I think they were rocks) with that subsoiler, maybe a couple stumps too :) I was most impressed watching the good'ol Ferguson DRAFT system at work... I don't really get to see the Draft mode kick-in much with my usual scraper blade, posthole digger, etc. work. I was telling my wife about the 'ol Ferguson DRAFT system.. she really could care less, so thought I'd post this message. Anyway, when my subsoiler would hit something hard, my TO-20 would get a little light in the front end for just a fraction of a second, I'd see the 'ol 3 PT raise the subsoiler up a little, or a lot as needed, and then let it drop back down again after passing the obstacle. I didn't have to do anything but hang-on, watch, and grin. I had trouble driving in a straight line as I was tending to watch the subsoiler a lot to see what was going-on back there...I did that subsoiler work in 1st gear, @ about 1/2 - 3/4 throttle.After making a mess with the subsoiler for a few hours, I switched to my rear blade to level the field. I had a few old manure piles and low spots that needs straightened out. Then I switched to an arena conditioner that has some 3-4 " rippers and a leveling bar on the back. Dragged that around until the clods were all broke down. I had to actually get off the Fergy to spread lime, fertilizer and seed with one of those garden tractor variety spreaders. I tied some old 8' tee posts behind the rear blade and used that to drag around to work the seed and fertilizer in a little. Spent 6 hours doing all that, most of it on my Fergy, used less than 1/2 tank of gas. My Fergy gets a bath tonight after work. _____ _____ _____ _____ _____ _____ _____ _____ __ - GL-1 sighting - I was at my local NAPA today (truck parts not tractor parts), they had several pails of GL-1 90W stacked-up, part # 65-205. I asked the guy what the price was, $36 each. George
|