Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Harry Ferguson Tractors Discussion Forum
:

solid state ignition for 6volt system?

Welcome Guest, Log in or Register
Author 
gshadel

06-03-2004 08:10:36




Report to Moderator

I admit I'm lazy, I haven't looked yet. Is there a 6 volt solid state ignition unit out there for my TO-20 so I don't have to mess around with points and condenser?
I replaced points and condenser yesterday, I remembered how much I hated messing around with points and dwell 25 years ago on my old Pontiac.
My 6 volt system is strong, I'm not interested in converting to 12 volts just to get a solid state unit.... Seems like a lot of the eletrical questions on these posts are from guys having trouble with a 12 volt conversion.
thanks

[Log in to Reply]   [No Email]
Mike Ferguson

06-07-2004 11:40:03




Report to Moderator
 Re: solid state ignition for 6volt system? in reply to gshadel, 06-03-2004 08:10:36  
I put a six-volt electronic ignition system on my TE20 last year. It came from pertronix. After I installed it, the engine timing changed. I had to reset it about four times. After that, it has worked just fine, and I'd venture to say that it was the best thing that I've ever done to that tractor! It starts faster and runs more economically than ever. Mike Ferguson/Iowa



[Log in to Reply]  [No Email]
Ray,IN

06-04-2004 20:15:58




Report to Moderator
 Re: solid state ignition for 6volt system? in reply to gshadel, 06-03-2004 08:10:36  
Try davistractor.com and ----- --



[Log in to Reply]  [No Email]
Jerry/MT

06-03-2004 17:34:35




Report to Moderator
 Re: solid state ignition for 6volt system? in reply to gshadel, 06-03-2004 08:10:36  
George, I just got aPertronix for my TO-30 but I have 12 volt system. They didn't make 6 volt units when I got mine. Try Genesee.com , they might have a 6 volt unit.



[Log in to Reply]  [No Email]
To35

06-03-2004 13:08:35




Report to Moderator
 Re: solid state ignition for 6volt system? in reply to gshadel, 06-03-2004 08:10:36  
Try www.pertronix.com


best wishes
TO



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy