Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Harry Ferguson Tractors Discussion Forum
:

Plans for position control.

Welcome Guest, Log in or Register
Author 
Jeff-oh

03-29-2004 05:56:34




Report to Moderator

I tried to capture all the e-mails of thoes who wanted a copy of the position control plans. If you did not get a reply please re-post you e-mail.

Jeff




[Log in to Reply]   [No Email]
jdbw

03-11-2006 13:44:52




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
Could you please send me a copy of the plans? Thanks, Don

[email protected]



[Log in to Reply]  [No Email]
Clay-UT

11-26-2005 20:25:14




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
I would like a copy of the plans, thanks!

Clay
[email protected]



[Log in to Reply]  [No Email]
Tim TX

10-13-2004 10:07:17




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
If the plans are still available, I'd appreciate a set. I've tried to read the dimensions in the plans posted in the archives, but these old eyes can't squint that much, anymore. Thanx.



[Log in to Reply]  [No Email]
Dick- MN

04-06-2005 09:31:30




Report to Moderator
 Re: Plans for position control. in reply to Tim TX, 10-13-2004 10:07:17  
Tim, I'm looking for a copy of the print of the position control plans. Do you still have it? If you do, would you please email it to me. Thank you
in advance. Dick



[Log in to Reply]  [No Email]
Tim TX

10-15-2004 13:44:07




Report to Moderator
 Re: Plans for position control. in reply to Tim TX, 10-13-2004 10:07:17  
I now have a copy of the plans, thanks to members of this forum. I appreciate the help, and if anyone else needs a copy, don't hesitate to email me.



[Log in to Reply]  [No Email]
Leo Mares

05-13-2004 14:09:17




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
I would very much like a copy of these plans. TIA,
The Rev.



[Log in to Reply]  [No Email]
Scott

05-05-2004 04:50:58




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
I would also like the plans



[Log in to Reply]  [No Email]
James Morgan

04-24-2004 11:20:57




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
I to would like plans for position control



[Log in to Reply]  [No Email]
Randy Scott

04-22-2004 10:04:12




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
Please send me a copy of the plans. I see the ones on this web site, but I can not read them.



[Log in to Reply]  [No Email]
JIm Hodges

04-20-2004 08:47:43




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
Hello I would like to have some plans emailed to me also at [email protected] I do have a spam filter that will ask you to type in a word to let your email thru. It stops computer generated spam.



[Log in to Reply]  [No Email]
Randy Scott

04-07-2004 08:10:44




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
Please send me a copy of the plans if it is not too late.
[email protected]



[Log in to Reply]  [No Email]
Randy Scott

04-07-2004 08:06:49




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
If it is not too late please send me a copy of the plans for the position control on my TO-30.
rscott



[Log in to Reply]  [No Email]
Hat

04-01-2004 10:21:41




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
I could use a copy too.

Thanks

Hat



[Log in to Reply]  [No Email]
Michael Williams

04-01-2004 08:54:17




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
I would like the plans. My email address is [email protected].


Thank You,
Michael Williams



[Log in to Reply]  [No Email]
TerryMI

03-31-2004 18:47:33




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
Please send copy to [email protected] Thanks



[Log in to Reply]  [No Email]
NO Email, NO PLANS

03-31-2004 15:47:45




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
If you don't give and email address then we cannot get the plans to you!



[Log in to Reply]  [No Email]
Jeff-oh

03-31-2004 17:26:27




Report to Moderator
 Re: Re: Plans for position control. in reply to NO Email, NO PLANS, 03-31-2004 15:47:45  
Actually, what I have found is that everyone has provided their e-mail. When they asked for the plans. However, the default is to hide a provided e-mail and it is not necessarly clear that the toggle must be changed to Hide: No.

This is has not been a big concern as most have reposted.

Happy Tractoring
Jeff



[Log in to Reply]  [No Email]
scottm

03-31-2004 14:02:04




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
Same Here



[Log in to Reply]  [No Email]
scottm

04-01-2004 15:42:13




Report to Moderator
 Re: Re: Plans for position control. in reply to scottm, 03-31-2004 14:02:04  
Doh! [email protected]



[Log in to Reply]  [No Email]
Mike

03-31-2004 07:49:13




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
Please send me the plans Thanks Mike



[Log in to Reply]  [No Email]
Leein Mo

03-31-2004 05:28:19




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
Jeff,
I would like to have one as well if it is not to late.
[email protected]

Thanks!!



[Log in to Reply]  [No Email]
Rus Aus

03-31-2004 02:42:29




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
Please send me a copy too...
Thanks in Advance



[Log in to Reply]  [No Email]
Rus Aus

03-31-2004 02:46:09




Report to Moderator
 Re: Re: Plans for position control. in reply to Rus Aus, 03-31-2004 02:42:29  
Forgot to give my email
[email protected]



[Log in to Reply]  [No Email]
Mike Skrzypek

03-30-2004 15:57:10




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
Please include my name for a set of plans. thxs



[Log in to Reply]  [No Email]
Jeff-oh

03-31-2004 05:46:03




Report to Moderator
 Re: Re: Plans for position control. in reply to Mike Skrzypek, 03-30-2004 15:57:10  
Your e-mail is hidden and cannot be replied to.



[Log in to Reply]  [No Email]
Paul in AZ

03-30-2004 15:37:17




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
Please send me one also.

Thanks!



[Log in to Reply]  [No Email]
CandMFarm

03-30-2004 14:19:58




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
Shoot me one just for kicks! Thanks!

Mike



[Log in to Reply]  [No Email]
Dale in WV

03-30-2004 12:38:39




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
Jeff - Sorry for hiding e-mail; the italicized instructions misled me! dale



[Log in to Reply]  [No Email]
FRED MITCHELL

03-30-2004 09:05:41




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
please send plans for position control

thanks fred



[Log in to Reply]  [No Email]
Jeff-oh

03-30-2004 14:58:51




Report to Moderator
 Re: Re: Plans for position control. in reply to FRED MITCHELL, 03-30-2004 09:05:41  
You hid your e-mail.



[Log in to Reply]  [No Email]
C.T.

03-30-2004 08:17:38




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
I would like a copy of the plans also Jeff.

email me at [email protected]



[Log in to Reply]  [No Email]
James, UK

03-30-2004 05:42:36




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
Jeff, I have to give this a try sometime - please can you include me on the list. Thanks in advance.

email is spelled jj ashby at btinternet dot com.



[Log in to Reply]  [No Email]
Jeff

03-30-2004 08:08:13




Report to Moderator
 Re: Re: Plans for position control. in reply to James, UK, 03-30-2004 05:42:36  
I tried [email protected] and it came back. Sorry.



[Log in to Reply]  [No Email]
James, UK

03-30-2004 11:51:16




Report to Moderator
 Re: Re: Re: Plans for position control. in reply to Jeff, 03-30-2004 08:08:13  
Bother - I know the server has been playing up today - bless ISPs.

I know this is a pain, but could you try this one?

ashby at btopenworld dot com

It should be OK now at the ISP end, at least, I'm logged on now . . . . .

Thanks.



[Log in to Reply]  [No Email]
OKMike

03-30-2004 04:59:06




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
I want one, I want one....some kids never grow up.
Thanks in advance.
Mike



[Log in to Reply]  [No Email]
tokruys

03-30-2004 03:31:08




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
I viewed the plans in Parts & Pieces but was not able to read the dimensions.

If you can send a readable version, I would be interested.

Thanks in advance, Tom K.



[Log in to Reply]  [No Email]
John, IN

03-29-2004 17:50:59




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
Please send me a copy. Thanks.



[Log in to Reply]  [No Email]
larry(Bolton Ont.)

03-29-2004 13:44:43




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
Please send me a copy.



[Log in to Reply]  [No Email]
larrylunceford

03-29-2004 13:28:31




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
please send plans for position control thanks



[Log in to Reply]  [No Email]
Jeff

03-29-2004 15:33:42




Report to Moderator
 Re: Re: Plans for position control. in reply to larrylunceford, 03-29-2004 13:28:31  
To where? The plans can be seen on the parts and pieces photo gallery. Search under position control. (provided and posted by Rick)

Jeff



[Log in to Reply]  [No Email]
Chris

03-29-2004 11:07:31




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
I would like the plans too. Send them to me and I will send you a link to my webshots album with photos of what I have for position control.



[Log in to Reply]  [No Email]
Hey Jeff

03-29-2004 10:32:39




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
Which plans are you sending. I have some too and tried to post them in "parts and pieces" some time ago. If someone would give me a place to post the plan files let me know and I will upload them to the url. To see what I have posted here search "parts and pieces" for "position control"



[Log in to Reply]  [No Email]
Jeff

03-29-2004 11:10:12




Report to Moderator
 Re: Re: Plans for position control. in reply to Hey Jeff, 03-29-2004 10:32:39  
Rick,

These are the pictures and drawing you posted in Pic and Pieces. I had actually forgotton who had origionally posted this system.

Respectfully,
Jeff



[Log in to Reply]  [No Email]
Dale in WV

03-29-2004 08:58:04




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
Jeff - pls include in distribution dale



[Log in to Reply]  [No Email]
Jeff-oh

03-29-2004 15:47:32




Report to Moderator
 Re: Re: Plans for position control. in reply to Dale in WV, 03-29-2004 08:58:04  
Dale,

when the e-mail is hidden no one can see it. Thus, I do not have an address to send them to. Either unhide the address or type it in the text.

(also see not to larry above) The only problem with the posted pics. is that the dimensional drawing cannot be read.

Jeff



[Log in to Reply]  [No Email]
Al in BC

03-29-2004 07:46:12




Report to Moderator
 Re: Plans for position control. in reply to Jeff-oh, 03-29-2004 05:56:34  
I would certainly like a copy of the position control drawing.
Al.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy