Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum

Farmall Super C Tractor

Welcome Guest, Log in or Register
Bob Almstrom

01-08-1999 15:06:19

Report to Moderator


I am having trouble with hyd. oil getting by the seal and going down into my oil pan. I pulled the hyd. oil pump, and noticed lots of wear on the lead and involute of the pump gear. If there is a strain on the gear won't there be a strain on the shaft and seal? then allowing the hyd. oil to go on by? Any help will be appreciated, thank you.

[Log in to Reply]   [No Email]
C. Amick

01-12-1999 09:29:01

Report to Moderator
 Re: Farmall Super C Tractor in reply to Bob Almstrom, 01-08-1999 15:06:19  

Usually if the shaft moves around, it will wear the seal. If you have the number off the seal you can likely find a replacement at industrial bearing and seal suppliers. They may have one that will fit the shaft a little tighter. I buy all my seals and bearings from a company that supplies the mining industry. Hope this helps a little.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums

Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy