Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

'54 SH power steering help

Welcome Guest, Log in or Register
Author 
Leo semmler

06-04-2005 11:53:35




Report to Moderator

I want to install power steering on my "54 SH. It has live hydrolics, so I"m ahead of the game. What is the best/eaiest way to do this while keeping things looking clean and neat? I see one large and one small plug on the rear of the resivoir that would make a nice, neat , short hose run. I assume the small outlet is the pressure side but would only work if the control rod were pulled back. I don"t want to "hack" into the metal pressure pipe unless that is the only way to supply pressure to the PS unit. Your assistance is greatly appreciated.

Leo

[Log in to Reply]   [No Email]
Al in Mn

06-05-2005 13:29:33




Report to Moderator
 Re: '54 SH power steering help in reply to Leo semmler, 06-04-2005 11:53:35  
You can get the priority valve from the Steel Wheel Ranch in Kansas.



[Log in to Reply]  [No Email]
Redgreen Man

06-04-2005 17:28:19




Report to Moderator
 Re: '54 SH power steering help in reply to Leo semmler, 06-04-2005 11:53:35  
You need a priority valve, the PS doesn't need the full pressure, can't do it without one.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy