Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

424 headgasket

Welcome Guest, Log in or Register
Author 
Gary in Mozarks

06-01-2007 08:33:40




Report to Moderator

Well I finally got around to pulling the head off the 424 and you were right. Blown right across, between 2 and 3 cylinders. I tried to post a picture but for some reason I can't access the gallerys? Any ideas why it would blow after 4 yrs of good service?




[Log in to Reply]   [No Email]
the tractor vet

06-01-2007 16:35:00




Report to Moderator
 Re: 424 headgasket in reply to Gary in Mozarks , 06-01-2007 08:33:40  
Two things come to mind here (1) ya did not have the head torqued after she was up to operating temp , (2) the head needs milled as it is warp or the block needs to be milled .



[Log in to Reply]  [No Email]
Gary in Mozarks

06-01-2007 13:51:28




Report to Moderator
 Re: 424 headgasket in reply to Gary in Mozarks , 06-01-2007 08:33:40  
third party image

finally got the picture to go



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy