Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum

Hydraulic pump and/or repair needed, any advice.

Welcome Guest, Log in or Register
Author 
scooter01922

02-27-2008 17:57:07




Report to Moderator

Ok, i'm not sure if i posted this here before. Been looking for so many months now i just can't think straight. I have a new holland skid steer with a broken hydraulic pump. The shaft to control the flow was sheared off by the previous owner. I'ts a cessna pump ( line now owned by eaton) model # 70142-DAK. In looking around i have found the actual control plate that has the shaft attached but i'm decidedly not thrilled about fixing it myself. New pumps run about 1200$ and thats more than i'm gonna pay to fix an old skidsteer. Rebuilds seem to run about 6-700. I'm going to guess that a good pump shop can do it for less. The only thing is i can't seem to find one. I'm located in northern MA. If anyone happens to have any suggestion or comments please don't hesitate to add them.

Thank you

Scott

[Log in to Reply]   [No Email]
PD Mechanical

02-28-2008 07:42:34




Report to Moderator
 Re: Hydraulic pump and/or repair needed, any advice. in reply to scooter01922, 02-27-2008 17:57:07  
Scott: We should be able to fix that for you, and we"re somewhat close by in NY. Price would depend on exactly what it needs. Just finished a similar Cessna pump. Installed new shaft and rotor. Parts ran around $250. Call (315-559-4992)or Email me directly for more information. sales@pdmechanical.com



[Log in to Reply]  [No Email]
scooter01922

02-27-2008 19:26:53




Report to Moderator
 Re: Hydraulic pump and/or repair needed, any advice. in reply to scooter01922, 02-27-2008 17:57:07  
Oops i forgot that i meant to turn on the "show email" button. Should be there now. Drop me a line. If you would prefer you could call my cell, but i'm a tad wary of posting it online. Nothing against anyone here...ya just never know who might pop in and decide to cause trouble. I'll gladly e-mail you with it.

Scott



[Log in to Reply]  [No Email]
J Schwiebert

02-27-2008 18:17:22




Report to Moderator
 Re: Hydraulic pump and/or repair needed, any advice. in reply to scooter01922, 02-27-2008 17:57:07  
Somehow I need your e-mail address or your phone number or both.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy