Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Case Tractors Discussion Forum
:

SC Case Parts

Welcome Guest, Log in or Register
Author 
Dave Fullmer(W.

06-29-2006 19:42:12




Report to Moderator

I"m looking for a source of parts for my mid 40"s SC. Before I start buying much, I"m wondering where I might find a engine block. The carb is also missing. Everything else seems to be intact but the block has 2 diagional cracks for the middle of the top to both ends and one horizontal crack just above the start of the bulge for the bottem of the engine.

There is a shop nearby called Cast Iron Welding who has done a good job on one of my AC tractors, but the side of this block looks awfully intimidating.

Dave

[Log in to Reply]   [No Email]
C. Amick

07-03-2006 09:57:43




Report to Moderator
 Re: SC Case Parts in reply to Dave Fullmer(W.TN), 06-29-2006 19:42:12  
Here's one on Ebay. Click on link below.



[Log in to Reply]  [No Email]
Dave Fullmer(W.TN)

07-03-2006 15:59:47




Report to Moderator
 Re: SC Case Parts in reply to C. Amick, 07-03-2006 09:57:43  
Thanks C.
I missed this one. I looked through the listings but totally missed it. I have emailed him for shipping costs before bidding.



[Log in to Reply]  [No Email]
L.Lamp

07-01-2006 21:58:45




Report to Moderator
 Re: SC Case Parts in reply to Dave Fullmer(W.TN), 06-29-2006 19:42:12  
Before anyone considers welding one of the SC blocks, make sure you look it over very good. They can also crack on the valve gallery side and that is much harder to get to. You are better off with a used block that has no cracks or welds.



[Log in to Reply]  [No Email]
Camboted

06-30-2006 04:59:51




Report to Moderator
 Re: SC Case Parts in reply to Dave Fullmer(W.TN), 06-29-2006 19:42:12  
If I were you I'd watch ebay. There are quite a few SC's that get parted out. If you are not in a hurry you should find one fairly cheap.



[Log in to Reply]  [No Email]
maplehillfrm,pat

07-02-2006 07:14:23




Report to Moderator
 Re: SC Case Parts in reply to Camboted, 06-30-2006 04:59:51  
what do you think a block weighs?, shipping would be expensive or not, I have a sc that I am parting now, I was going to get another one to restore but it fell thru, this one was for parts, I took the valve cover off and all teh springs and roccker assy look good, but I havent tried to turn over yet,



[Log in to Reply]  [No Email]
Dave Fullmer(W.TN)

07-03-2006 16:02:44




Report to Moderator
 Re: SC Case Parts in reply to maplehillfrm,pat, 07-02-2006 07:14:23  
Where are you located?
Are you planning to sell the engine as is?
Dave



[Log in to Reply]  [No Email]
Bob/wis

06-30-2006 05:12:43




Report to Moderator
 Re: SC Case Parts in reply to Camboted, 06-30-2006 04:59:51  
Ted
Do you still need a SC sleeve. I just rembered it when I seen this post. Dave how soon will yoou need one and what part of TN do you live in. I can send one do that way at the end of labor day weekend I think. It would go to selmer tn.
Bob



[Log in to Reply]  [No Email]
Dave Fullmer(W.TN)

06-30-2006 14:58:13




Report to Moderator
 Re: SC Case Parts in reply to Bob/wis, 06-30-2006 05:12:43  
Bob, Call me at 731-693-5387. I would like to know some more details about that block. I live north of Selmer about 80 or 90 miles near McKenzie.

Dave



[Log in to Reply]  [No Email]
Bob/wis

07-01-2006 03:58:38




Report to Moderator
 Re: SC Case Parts in reply to Dave Fullmer(W.TN), 06-30-2006 14:58:13  
Dave, If things work out , my buddy works at jackson. He comes up here for parts and vaction every now and then. Last summer we took a 2 row mounted picker down to him. I was planning on a trip down to his place in a couple of weeks. But, with the way the weather has been and oats going to be needing combine in a few weeks that was shot. We are still trying to get first crop up. When we get done with it it will be right back at 2 nd. i wll get checking this block over. I will email you with what I find.
Later
Bob

[Log in to Reply]  [No Email]
Camboted

06-30-2006 07:49:33




Report to Moderator
 Re: SC Case Parts in reply to Bob/wis, 06-30-2006 05:12:43  
Bob,

Yes, actually I could use one of both (the old style and the new). My email is: fmi@online.com.kh



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy