Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

Tractor recommendations

Welcome Guest, Log in or Register
Author 
Joel B.

06-05-2006 10:50:23




Report to Moderator

I'm posting this on multiple boards to get the most options.

I have a '44 Ford 2n that I was hoping to use to pull my boat out of the water...not going to happen, not enough weight. This is not at a nice public boat launch, just at the shoreline of my cabin. Would filled tires add enough weight? They used to be filled but I got tired of the corroded valve cores leaking and drained them. I suppose I could fill them with anti freeze but how much weight would that add? How much weight can I add to a 2n?

And finally, what would your tractor recommendation be? I need something short, squatty, gas, wide front (dealing with a hill) and around 4000 pounds and under $5000. I'm guessing on the weight, I know the boat/motor/trailer weighs about 2500 pounds plus pulling it over a lip at the shore and up a slight incline at the lake.

Thank you for any ideas,

Joel B.

[Log in to Reply]   [No Email]
Mathias NY

06-05-2006 11:36:44




Report to Moderator
 Re: Tractor recommendations in reply to Joel B., 06-05-2006 10:50:23  
How far does it have to be moved?

A winch might work if there was something to anchor the tractor to. Have you considered adding a ramp into the water to get rid of the lip you mentioned?

Adding calcium to the tires will might add 800-1000 lbs to your tractor. The early Ford tractors were designed to be light, they used the drafting force of their mounted implements to make up for the difference. It was a good system as long as you were using a mounted implement.

Since this is a Case forum, I will suggest a Case model D. They are the same vintage as your 2n, just shy of 6000 lbs, gas, WFE, 5' wide, 10' long, and about 5' tall (minus exhaust and air intake). They are quite nimble and lug quite well. One in decent condition would be under $2000.

[Log in to Reply]  [No Email]
Klyde

06-06-2006 03:52:25




Report to Moderator
 Re: Tractor recommendations in reply to Mathias NY, 06-05-2006 11:36:44  
Get those fender skirts on yet?????



[Log in to Reply]  [No Email]
Mathias NY

06-06-2006 11:37:49




Report to Moderator
 Re: Tractor recommendations in reply to Klyde, 06-06-2006 03:52:25  
Nope, not on yet, they looked a little small when I place them next to the fenders on the DO.

I tried looking through some books on Case tractors to see if I could spot the fender style. It looks as though they are actually for a Case SO. Now I just need to find someone with a set of DO orchard skirts, who happens to have be looking for some SO orchard skirts...



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy