Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

34 bump rims for VAC Case

Welcome Guest, Log in or Register
Author 
Craig Vassar

06-04-2006 14:41:11




Report to Moderator

Time to get Grandpas Case VAC back to work with the sickle mower after several years idle. She runs good yet, but has fluid in the tires, which will soon end the lives of the rear rims by the looks of it. The tires are 10 x 34, on rims with the 2 ridges on the center. The rims appear to be 9" wide edge to edge. Anyone know where to get 1 or 2 like this? If not, any suggestions on a good alternative? I appreciate any help, as the ditches are growing fast!

[Log in to Reply]   [No Email]
mj

06-05-2006 06:46:59




Report to Moderator
 Re: 34 bump rims for VAC Case in reply to Craig Vassar, 06-04-2006 14:41:11  
You could change over to the more common 28" rims and hubs. Hubs are pretty plentiful in that size but shipping can get pricey.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy