Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

DC domed pistons

Welcome Guest, Log in or Register
Author 
Nedd

04-18-2006 08:47:10




Report to Moderator

Are the new ones being made, 4 1/16" or 4"? My got a D a while back and just started working on it. It has the 4 1/16 domed pistons in. But can't figure out why they would put them in a D. Surely a DC would be a better puller at the tracks. Just curious might do some track pulling in the not to distant future.




[Log in to Reply]   [No Email]
Camboted

04-18-2006 16:01:51




Report to Moderator
 Re: DC domed pistons in reply to Nedd, 04-18-2006 08:47:10  
New pistons and sleeves are 4&1/16 inches in both flat and dome.



[Log in to Reply]  [No Email]
DBoll

04-19-2006 04:59:24




Report to Moderator
 Re: DC domed pistons in reply to Camboted, 04-18-2006 16:01:51  
On your flattops did you make the comp. height so the piston comes to the top of the block? some of the old comformatics shortened the comp. distance to compensate for the increase in displacement, I like them to come up flush.



[Log in to Reply]  [No Email]
Camboted

04-19-2006 06:06:30




Report to Moderator
 Re: DC domed pistons in reply to DBoll, 04-19-2006 04:59:24  
Doug, they come pretty close to the top. They are the same as the M&W dome without the dome.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy