Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

The big mistake

Welcome Guest, Log in or Register
Author 
Mikey

01-13-2006 21:39:49




Report to Moderator

This is just my opinion, but I think the biggest mistake that Case ever made was back in 1972 when they made the decision to buy David Brown. Those David Brown tractors were by far inferior to the Case 470 (430), 570 (530), 770 and the 870. Plus it deluted the "Case" brand name. I believe that"s why they switched to the power white / power red colors, and slapped the Case logo on the David Brown tractors, but by then it was to late.

I remember arguing this point with the local Case dealer back in 1974 when I bought a new 870, but all he would do is spout the companys selling points about the D.B"s (at the time he had 3 new 1210"s on the lot and he wanted to sell me one. Then this last fall, I helped out a neighbor with some chisel plowing using his David Brown 1410 which replaced the 870 around 1977. After about 3 hours, I went back home, and came back with my 1974 870 and used that to finish the task of about 200 acres.

Anyway, I started thinking about this during that time, and thought I would ask for your thoughts. Where am I right here, but where am I wrong?

[Log in to Reply]   [No Email]
RPoff

01-16-2006 11:09:19




Report to Moderator
 Re: The big mistake in reply to Mikey, 01-13-2006 21:39:49  
I own a DB 885. Have had it just under a year, and it's a mid 70's. This should put it around the Case/DB era. It is a bit lighter than a domestic, but has good power. Runs good , starts good. Haven't had to work on it too much in depth, but what I have done hasn't been bad. It is a good tractor over all. I agree that things are getting too hard to work on, and over priced. The next logical move for the tractor companies is the one they have made: Stop making parts availible! They know that most people buying parts are doing the work themselves. This is already money out of thier pockets in lost labor. Stop making parts and people will eventually run out of ways to repair the old,durable, great stuff. Then if you wish to continue your farming, you will HAVE to buy new or newer. tractor parts are headed the way of the old mom and pop store and the small farmer-being eat up by large, profit-making conglomerations. Now,I know that alot of folks on this site aren't farmers, but the tractor that you are restoring was manufactured with that or a very similar intention in mind. Some families still make a living that way, and some do it because they love it. It is just becoming alot harder to do with shortages of parts for older, still productive tractors.

[Log in to Reply]  [No Email]
Walt Davies

01-15-2006 18:06:07




Report to Moderator
 Re: The big mistake in reply to Mikey, 01-13-2006 21:39:49  
Don't know a lot about the DBs but I have had a couple Case tractors an SI which was quite a nice little tractor for what it was I pulled a large two bottom plow in very hard ground with that little tractor. It held up very good to hard work. When a bearing in the tranny went out I gave it to the Brooks museum thye still have it stored in the back of building evey year I complain but ot no avail. I have two LAs now one 45 for woking and one 48 for parts. Mom wants the 48 fixed up but I would have to buy anothet one for parts and she just doesn't see that.
I seem to be able to get lots of parts like eletrical and carb but the big stuff you have to repair or get aparts tractor. Someone said they got good fuel milage I bet they never owned a Case LA. Walt

[Log in to Reply]  [No Email]
WALTER T.

01-14-2006 22:02:21




Report to Moderator
 Re: The big mistake in reply to Mikey, 01-13-2006 21:39:49  
I AS A FEW HOW STAND'S BEHIND OUR OLD TRACTOR'S.I BELEIVE THE CASE COMPANY HAS ALWAY'S BEEN A STRONG BELEAVER IN KEEPING THERE NAME AS A SIMBLE TO THE WORLD AS A GOOD TO MODERATE COMPANY. AND AS TO THE EQIPMENT AND TRACTOR'S IS THIS. CASE PURCHASED THE OTHER COMPANY'S IN STEAM AND IN GAS DEISEL AND ELECTRIC. I HAVE HAD A LOT OF THE DIFFERENT TRACTOR'S THAT CASE HAS BAUGHT OUT. OR KEPT A FLOWT. ALL THE COMPANY'S LIKE DAVID BROWN, INTERNATIONAL ALL HAVE FELL TO THE DESINER'S OF CASE. WHARE AS OF CASE THEN USED THE ADVANCED PATEN'S THAT THESE COMPANY'S HELD SO THE CASE TRACTOR COULD BE BETTER. EASYER TO REPAIR. YES MY OLD GIRL'S ARE WORN OUT AND LEAK OIL AND ALL. BUT I KEEP THEM GOING. NO MATTER WHAT. THE FUAL ECONIMY IS REALLY GREAT WITH MY OLD GIRL'S THEY DO THE WORK AND NEVER COMPANE. I HAVE A LOT OF RESPECT FOR CASE NO MATTER WHAT ANYONE SAY'.I REALLY THINK. THAT WHEN I DIE. I WILL LEAVE A GREAT OLD TRACTOR TO SOMEONE THAT WILL LOVE THEM AS I HAVE THE LAST CENTURY'S. AND I AM SPEAKING OF MY CASE VAC 1212 430 LA LAI 770 970 1270 2470 AND RC. IF COULD FIX THEM ALL UP I WOULD.SO THIS IS MY THOUGHT. CASE IS ALWAY'S LOVED BY SOME ONE SOME WHARE IN THE WORLD LIKE MANY OTHER MANUFATOR'S. I LOVE ALL OF THE OLD TRACTOR'S.

[Log in to Reply]  [No Email]
Elmer

01-14-2006 18:07:04




Report to Moderator
 Re: The big mistake in reply to Mikey, 01-13-2006 21:39:49  
I think i will take a step in defence of the David Brown tractor. My opinion is the worst thing that happened to David Brown is the purchase by Case or Tenneco! They are nothing but a bunch of bean counting bastards! That is why the discontinued parts is becoming a problem. They are no longer fast moving items! This province was and still is flooded with DB tractors and seem to be hard to kill. They have their perks just like anything else, but overall did a good job. As far as an 870 being compared to a 1410, the 870 has more advantage. But not everybody understood what the TCU was for either on the DB. Basically a misunderstood tractor. And "OIL LEAKS". I always say that a David Brown is like a Detroit Diesel! If it is not leaking oil something is wrong! I have ran into many examples of David Brown's here that have past 10,000 or 20,000 hours. There are not too many Case tractors around here that have achieved that! Just my 2 cents.

[Log in to Reply]  [No Email]
John Saeli

01-14-2006 05:22:08




Report to Moderator
 Re: The big mistake in reply to Mikey, 01-13-2006 21:39:49  
Hey Mikey: You hit the nail on the head. No comparison between a D-B & a CASE. Just compare the iron in a 770 or 870 & the iron, or lack of in a D-B. The Browns were probably OK for what they were originally designed for, but never day in & day out hard work like the CASE. Thad is also correct in what he says about Parts availability. Our Parts dealer told me that with the last Price increase, a huge number of Parts were discontinued. I tried to get some steering parts for a Comfort King yesterday & was told they are "No Longer Furnished". Definately not the CASE Co. I grew up with.

[Log in to Reply]  [No Email]
Bret4207

01-14-2006 06:32:37




Report to Moderator
 Re: The big mistake in reply to John Saeli, 01-14-2006 05:22:08  
Hey John- The more parts they discontinue, the more parts you can have made and reap the $$$! I envision guys like you doing what the Ford and JD specialty suppliers are doing- supply no longer available tractor parts to guys like me who work the older rigs. I don't mind payin a few bucks more for a decent part rather than being FORCED to buy a new tractor. Even Ma Deere is failing here.

FWIW- I got an 811b gas last fall. Everyone said the COM was junk, except a few guys here and one wise old farmer near here who said they worked great. He said operator error was the biggest problem. Same with the Ford SOS. He was right! Even though I need a valve job REAL bad and rings while I'm at it, this tractor is so far above my 850 For it's not even funny. Once I get either a hydraulic top link or figure the geometry out on the Eagle hitch I'll be in heaven.

That same old farmer runs a bunch of Case/DB's- 1210's 1410's I think. They work ok, but what a pain to fix! Lotsa power while they run though.

I think the biggest mistake Case, IH, Allis, Minnie Mo, etc made was diversifying too much, especially Allis, and loosing sight of what made them money. Some of the companies didn't put the bucks into R+D of better designed equipment. Or they didn't handle a full line of quality equipment and depended on someone else to supply their implements, etc. The other big mistake they all made was not having guys with an agricultural background in charge. An MBA doesn't mean you understand the dollars and cents of farming. $175,000.00 combines and $100,000.00 tractors mean you aren't going to sell many each year. Now we see them failing to provide support for their products. Bad, bad.

[Log in to Reply]  [No Email]
glr62

01-14-2006 12:00:24




Report to Moderator
 Re: The big mistake in reply to Bret4207, 01-14-2006 06:32:37  
I'm surprised there isn't more talk on the top link. Finally gave up and added to center mast on implements. Seems like 9" did the trick.



[Log in to Reply]  [No Email]
Bret4207

01-14-2006 12:34:44




Report to Moderator
 Re: The big mistake in reply to glr62, 01-14-2006 12:00:24  
I cut the ears off my bale spear and welded them back on top of the square tube frame. That helped alot. That added about 6 inches. Maybe 3-5" more would help. I understand the original Eagle top link attachment point was over the PTO shaft. I don't have that piece, but hear John is getting some. My need is for getting the bales high enought to clear any humps or coming out of dips. Thats where the hyd top link idea comes in. Either that or lengthen the Eagle lift arms to gain height.

[Log in to Reply]  [No Email]
MJ in the UK

01-14-2006 04:59:31




Report to Moderator
 Re: The big mistake in reply to Mikey, 01-13-2006 21:39:49  
David Brown tractors were built with good old fashoned UK engineering practices so you had to put up with oil leaks and the occational breaking crankshaft. MJ



[Log in to Reply]  [No Email]
Thad

01-14-2006 03:57:10




Report to Moderator
 Re: The big mistake in reply to Mikey, 01-13-2006 21:39:49  
In my opinion their big mistake was selling out to New Holland or what ever evil owns them. Now you have CNH and no parts for the older tractors. Has anyone else noticed the amount of parts they are making no longer available. This goes for the older IHs also. You go to a dealer in this area looking for parts for a 2090 or 70 seies. You will here well you know your tractor is to old and is worn out junk. In my opinion the mixed up combination tractors they are selling now are the problem not my 25 or 30 year old Case. Or am i wrong? Just my two cents. Thad

[Log in to Reply]  [No Email]
Mikey

01-14-2006 05:37:55




Report to Moderator
 Re: The big mistake in reply to Thad, 01-14-2006 03:57:10  
That's scary. I have a 1966 730 CK as well and these are both working tractors that I plan on keeping and using for many years to come. I just don't see the 30 or 70 series to be that old yet. I live in southern Wisconsin, and see lots of these tractors still being used everyday.

If we can't get the parts we need... oh man, I don't even want to think what this could mean. "EVIL CNH" may be right!

[Log in to Reply]  [No Email]
Camboted

01-14-2006 00:52:19




Report to Moderator
 Re: The big mistake in reply to Mikey, 01-13-2006 21:39:49  
The DB's sure don't have the best track record. Their biggest mistake? Maybe, although I think you could argue, about not releasing the 400 in 1953 instead of 55, or about not recalling the early Case-o-matics, and corercting the rather minor problem that ruined their reputation.



[Log in to Reply]  [No Email]
1031D

01-15-2006 22:13:22




Report to Moderator
 Re: The big mistake in reply to Camboted, 01-14-2006 00:52:19  
Around here guys always called them "crap-o-matics" because of the small oil port problems and heat problems. All of mine are gear drive comfort kings and older flambeau red. The thing that pissed me off the most is they can't get power steering parts for my 1030, but I can buy bearings and all kinds of other junk for my VAC. When I asked for power steering parts, they started to talk trade in value, and I should buy a new one, what has happened to CASE? I bet old J.I. is rolling in his grave right now in disgust. I guess the CASE some of us grew up to love is long gone and never coming back. I did have my choice of words with the dealer though when he offered to sell me a new NH, what a pile of plastic crap! It was a tractor frame wrapped up in a soda bottle for $175,000! And all this new computer crap. My neighbor has 2 brand new JD 4wd's, and I see his old 1470 out working more that his new pop bottles. Maybe it's time some people got their heads out of you know where and made things like they did in 1970. Simple, cheap, strong, and durable, not complicated, overpriced, crappy, throw-away machinery like this junk we have now. Just my quarters worth.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy