Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

630 triple-range

Welcome Guest, Log in or Register
Author 
Henry J. Koopma

07-30-2005 20:56:33




Report to Moderator

Back in the early 60's my dad purchased a used 630 with 4 x 3 transmission, with both foot & hand clutches. Was this a rare set up?
Thanks for taking the time.




[Log in to Reply]   [No Email]
S.jewell(630 crazy)

08-01-2005 18:57:02




Report to Moderator
 Re: 630 triple-range in reply to Henry J. Koopman, 07-30-2005 20:56:33  
The "630" is kind of "rare" in itself with less than 2000 units ever produced, but the 4 and 3 is not...Mine is a triple range, so is my uncle's and their is one on ebay right now that is a triple range. The foot clutch kills everything (including pto),the hand clutch just stops the transmission. Some units had "live power" and a hand clutch GO Figure?????



[Log in to Reply]  [No Email]
Joe (Wa)

08-01-2005 23:23:13




Report to Moderator
 Re: 630 triple-range in reply to S.jewell(630 crazy), 08-01-2005 18:57:02  
"Some units had "live power" and a hand clutch GO Figure?????"

That just good Case engineering. They put that hand clutch on their tractors for us old boys that grew-up on those JD A & B's. Heck, my leg was too short to reach a foot clutch until I was 17. Had to drive standing up to see over the steering wheel.

Joe



[Log in to Reply]  [No Email]
S.jewell(630crazy)

08-02-2005 07:31:28




Report to Moderator
 Re: 630 triple-range in reply to Joe (Wa), 08-01-2005 23:23:13  
That's true... I remember the 630 was the first tractor that ever drove when I was a kid. I couldn't reach the pedals either so I would use the hand clutch. If brakes were needed it required a whole other technique of jumping off the seat, grabbing the clutch and stomping on the brakes. It's amazing that we were not all killed. By the time I was 10 or 11 I had graduated up to the 930 and cutting hay by myself� I guess when you grow up around farm equipment you have a better idea on how things work and were not to stick your hands.

[Log in to Reply]  [No Email]
Henry J. Koopman

08-03-2005 20:18:52




Report to Moderator
 Re: 630 triple-range in reply to S.jewell(630crazy), 08-02-2005 07:31:28  
Thanks for your responses. But that brings up another question? If some of you guys were so *slight of stature* (vertically challenged?) that you had trouble reaching the foot clutch and brake pedals, how in the world did you work the hand clutch? I was 6', 180# and 16 when we got ours and I seldom used it because it was so hard to engage. Used to have to brace my foot towards the back of the platform, rest my arm on my knee and use my calf muscles to push my knee & arm and thus get the leverage to get it to lock in. Or did we have a problem and not know it?

Would love to own one again, but as a full-time pastor of a dual parish in northern Minnesota, and living in town, I have trouble justifying such an expenditure. But I can still dream.

[Log in to Reply]  [No Email]
Joe (Wa)

08-03-2005 21:16:45




Report to Moderator
 Re: 630 triple-range in reply to Henry J. Koopman, 08-03-2005 20:18:52  
When you have to stand up to drive you learn to use your feet and leg muscles. Only time I remember sitting in the seat was when plowing, could actually catch a quick nap if the field was long enough.

"vertically challenged"??? What is that? You must mean "runt"?

Joe aka Stubby



[Log in to Reply]  [No Email]
Henry Koopman

08-09-2005 21:10:36




Report to Moderator
 Re: 630 triple-range in reply to Joe (Wa), 08-03-2005 21:16:45  
Nap while plowing??? We MUST have been doing something wrong! About the time I *spaced out* while plowing cornstalks would start bunching up under the plow. Of course that would push the plow out of the ground and you'd notice the increased speed and quieting of the engine. We had an older plow - low clearance.

Runt? Perish the thought! Short is more polite. But there were times when that can be an advantage. Beside, that has nothing to do with whether or not your *good people.*

May you know His peace always.

[Log in to Reply]  [No Email]
JohnSaeli

07-31-2005 07:51:22




Report to Moderator
 Re: 630 triple-range in reply to Henry J. Koopman, 07-30-2005 20:56:33  
Hey Henry: Not so rare. Maybe somewhat rare for a 630. Most 630's I've seen had the Case-O-Matic Drive, but we have a 630 here with the Triple-Range. About all the 300's, 350's, 200B's,300B's,500B's, had the Triple Range.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy