Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

case 830

Welcome Guest, Log in or Register
Author 
fowler

06-12-2005 14:20:49




Report to Moderator

looking at buying a 830 with a cab but would like to take cab off if i bought it is that possible.Are these tractors dependable




[Log in to Reply]   [No Email]
SHeiserman

06-12-2005 19:26:00




Report to Moderator
 Re: case 830 in reply to fowler, 06-12-2005 14:20:49  
I'm only familiar with comfort kings, and if you take the cab off you'll need fenders to mount the 3 pt lever back on. Steps up to the platform may be needed too. I had an Egging cab on mine and the original steps were left in place so not a problem for me there. I bought a set of good fenders from Don Livingston [(507) 433-0073)]. The fenders I bought from him had the grab handles on, so I didn't worry about the little rail that goes on the side that I do not have. I for one like it much better w/o the cab. As far as dependability goes, I haven't had any trouble with mine. Good luck.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy