Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

SC wheel centers and rims

Welcome Guest, Log in or Register
Author 
Steve from PA

06-12-2005 10:46:22




Report to Moderator

I was just wondering if anyone could tell me the secret to centering the wheel centers in the rims after they have been removed. I have the six spoke dished centers. Because there are lugs on bth sides, I was thinking that putting a level across the rims might be a good place to start, then tighten one side of the lugs until the center is level also. But I'm not sure how that will work with the dished centers. Anyone have a tried and trued method? Your input would be greatly appreciated. Thank you. Steve in PA

[Log in to Reply]   [No Email]
Jim Evans

06-21-2005 19:28:40




Report to Moderator
 Re: SC wheel centers and rims in reply to Steve from PA, 06-12-2005 10:46:22  
I never really worked that hard at getting them centered. I would guess that the correct method is to tighten the heavy clamps up completely, then tighten the light ones slowly and evenly until the they are tight.

Jim



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy