Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

VAC Case value

Welcome Guest, Log in or Register
Author 
Kelly (KS)

03-08-2005 07:39:22




Report to Moderator

Found a VAC Case with a wide front and 3-pt....it doesn"t run, but ran when it was parked 3-4 years ago. What would it be worth? Thanks




[Log in to Reply]   [No Email]
mj

03-11-2005 16:44:23




Report to Moderator
 Re: VAC Case value in reply to Kelly (KS), 03-08-2005 07:39:22  
third party image

This one (1950) sold for $500 last fall...it has a complete, original Eagle hitch and VERY straight tin except for the missing tool box door (but we know what prompted it's removal...right?).....only needed a battery, float, needle & seat to run. It was purchased from a private party, NO auctioneer...NO dealer...NO BS.

[Log in to Reply]  [No Email]
Paul f

03-08-2005 16:27:59




Report to Moderator
 OK Time for some controversy in reply to Kelly (KS), 03-08-2005 07:39:22  
I could ask if the motor could be turned over by hand etc. But instead to determine value, what do what do Ford 8Ns in similiar condition go for in your area???...(Like real estate tractor values are in large part based on Location Location Location) and unfortuntely Fords are universally more popular (at least if based on price) than VACs. Can anyone on this board truthfully say that in their area comparing a Ford 2,8,9n and a similar quality VA series the Ford won't bring more money?? (Personally I hope that some of you can prove me wrong). I have a DC and a VAC and have no interest in having a Ford...but I seem to be in the minority...Working farms have a difficult time making ends meet and by and large cannot spend time and effort on older small tractors..The market driver for smaller older tractors are hobby farmers, sububanites, exurbanites,(I fall somewhere in thais category) whatever term you you choose to apply and those folks seem to prefer Ford 8Ns...Every auction I have been to an 8n will bring more money than any similiar size/age tractor and indeed in the Northeast where real farms are disappearing an 8n will bring more money that a 40-75 hp tractor....I paid far less for my DC than an 8n in worse conditon at the same auction...Same for my VAC

The upside is a VAC can be a great deal as it is a great tractor and you can get them for less money than Fords..
Paul f

OK guys beat me up!!

[Log in to Reply]  [No Email]
donald mitcham

03-10-2005 07:16:07




Report to Moderator
 Re: OK Time for some controversy in reply to Paul f, 03-08-2005 16:27:59  
ok paul you said to beat you up here goes i have had several 8 ns fergusons 20 and 30s and 3 years ago purshased a vac 14 in good cond motor wise for 300 dollars the best 300 dollars i ever spent on a tractor i painted it restored it to a fashion put chains on it and ill tell you i wil back up to your 8n drawbar to drawbar and pull you backwards first of all the vac i have has 36 inch rubber and has a wider spread maybe the vac 14 mine is a 1957 last year the vac was made i believe according to my serial number anyway so to end this conv the vac with higher rubber than mine that i drove brand new in 1952 was a real nice tractor that had a 6 ft cutter bar mounted on rear and the foot feed for gas peddle was quite an improvement over the old dc that i used for a long time on a neighbors farm thanks for listing mitch pa

[Log in to Reply]  [No Email]
martin in DE

03-10-2005 16:19:47




Report to Moderator
 Re: OK Time for some controversy in reply to donald mitcham, 03-10-2005 07:16:07  
Donald,do you have a build card for your VAC-14. I have not seen one with 36" rubber and 1955 was the last year they where built. Martin



[Log in to Reply]  [No Email]
Augie

03-09-2005 18:12:05




Report to Moderator
 Re: OK Time for some controversy in reply to Paul f, 03-08-2005 16:27:59  
Wouldn't think of beating you up over that. You're dead-on.

A good-running VAC will work a good-running N Ford into the ground.

Never could understand why some folks are so fond of the N series. I cut my teeth on a 8N in the hayfield and if I ever have to sit on another one it'll be too soon.

I have noticed a decline in N prices over the last few years. 4 or 5 years ago you'd need $4k to buy a good 8N, now it only takes $2500-$3000. I think the abundance of cheap China import tractors are what's behind that.

That said, I wouldn't think of trying to put a value on a VAC based on what N Fords are going for any more than I'd try to price a 970 based on what 4020 JD's are bringing.

It's an apples and oranges thing. It doesn't make sense to me to buy an apple that I don't like when I can buy an orange that I like a whole lot for 1/3 the price of the nasty old apple...

[Log in to Reply]  [No Email]
Dale Olson

03-09-2005 10:08:10




Report to Moderator
 Re: OK Time for some controversy in reply to Paul f, 03-08-2005 16:27:59  
I grew up with the '53 Ford Jubilee of my Dad's, and I now own and use my Grandpa's '48 Case VA. The 8, 9, 2N etc. Fords use a 3-point hitch that fits a lot of impliments out there. Even with an Eagle hitch, I think a lot of people are turned off by not knowing if they can find the tools to use with the tractor. My Case has just a drawbar, and I had to look a little to find a 5' drawbar KingKutter rotery mower. And then I had to tear out a PTO gear to learn that you disengage BEFORE you make that sharp turn!

The Fords might be seen as easier to get on and off of, and if you compare features year-to-year, I think the Fords might be seen as more advanced.

So, I guess it boils down to what you grew up with, what you use it for and what you like.

[Log in to Reply]  [No Email]
Jerry W

03-08-2005 16:53:55




Report to Moderator
 Re: OK Time for some controversy in reply to Paul f, 03-08-2005 16:27:59  
The VAC Case is twice the tractor as the 8N/9N Ford at half the money. Junk Fords bring as much as nice VAC's and I wouldn't own a 8N/9N if they were giving them away.

Just my opinion.

Jerry



[Log in to Reply]  [No Email]
mj

03-08-2005 15:24:50




Report to Moderator
 Re: VAC Case value in reply to Kelly (KS), 03-08-2005 07:39:22  
250 to 400 in this part of the country...Western Colo.



[Log in to Reply]  [No Email]
Jerry W

03-09-2005 07:32:09




Report to Moderator
 Re: VAC Case value in reply to mj, 03-08-2005 15:24:50  
WOW - If those 1952 and newer VAC's were that cheap in my country, I would buy every one of them. 90% of them have Eagle hitches and wide fronts. Last week a late model VAC grill needing some minor work brought $137 on ebay.

Heck - the early ones (42 to early 52) even bring the $200-$400 where I am at. They must be giving those away out where you are at.

Jerry



[Log in to Reply]  [No Email]
mj

03-11-2005 10:05:37




Report to Moderator
 Re: VAC Case value in reply to Jerry W, 03-09-2005 07:32:09  
Jerry- I AM buying every one I can.



[Log in to Reply]  [No Email]
Jerry W

03-08-2005 11:21:47




Report to Moderator
 Re: OOPS small picture in reply to Kelly (KS), 03-08-2005 07:39:22  
third party image

Case VAC-14 - Ebay auction 3878922997



[Log in to Reply]  [No Email]
Richard G.

03-08-2005 12:44:42




Report to Moderator
 No radiator? in reply to Jerry W, 03-08-2005 11:21:47  
Is it just me or is there no radiator in the above photo?



[Log in to Reply]  [No Email]
Jerry W

03-08-2005 14:29:00




Report to Moderator
 Re: No radiator? in reply to Richard G., 03-08-2005 12:44:42  
There is no radiator but if you read further in the auction the seller claims that the picture was taken awhile ago and that the tractor is now complete and runnable.

Jerry



[Log in to Reply]  [No Email]
Jerry W

03-08-2005 11:15:24




Report to Moderator
 Re: VAC Case value in reply to Kelly (KS), 03-08-2005 07:39:22  
third party image

Kelly

I would guess that that VAC is a 1952 VAC-13. It differs from the VAC-14 in that the VAC-13 is a high platform tractor. The VAC-14 is a low platform tractor. The 13's usually have 34" rear rubber and the 14's usually have 28" rubber.

My reasoning is that 1952 is the first year of the later VAC's which this is and also about the last year of the early style seat which this tractor has. Subtract 4 from the first 2 digits of the serial number for the year but I would bet it was VAC 56***** something.

If that tractor was in my neighborhood and it checked out for no frost cracks in the block and water in the tranny/rear end, I would expect it to bring $500 to $800. A good front end, Eagle hitch, later sheet metal and a few other parts would easily get your money back if you were to part it out which I would really hate to see but... These late VAC's are by far my favorite.

Check the front end out for repairs - they are prone to cracking where the outer tube clamps down on the inner tube and also in the center.

This is a picture of a nice low platform VAC-14 on ebay right now. Compare it to the tractor you are looking at and you will see the differences I mentioned. His reserve I believe is $3000


Jerry

[Log in to Reply]  [No Email]
Arthur

03-08-2005 08:46:29




Report to Moderator
 Re: VAC Case value in reply to Kelly (KS), 03-08-2005 07:39:22  
If it's not running, it's a gamble if any/all of the sub-components are in working order....The eagle hitch could be broken, or tranny could be gone.....Usualy there is a reason they parked it a "couple of years ago" Course if your a "fix it kind" it's probaly worth a couple of hundred dollars...Make sure the tires are up and usable, cause if they arn't, it will cost 3 to 4 hundred for that alone...

[Log in to Reply]  [No Email]
Kelly (KS)

03-08-2005 08:20:44




Report to Moderator
 Re: VAC Case value in reply to Kelly (KS), 03-08-2005 07:39:22  
I posted a pic in the tractor photo section.
Thanks, Kelly



[Log in to Reply]  [No Email]
C. Amick

03-08-2005 07:56:53




Report to Moderator
 Re: VAC Case value in reply to Kelly (KS), 03-08-2005 07:39:22  
Has it been parked in the dry so that water didn't get into the engine? What is the condition of the sheet metal and tires? Is it a VAC-14? Location also affects price.



[Log in to Reply]  [No Email]
Kelly (KS)

03-08-2005 08:13:51




Report to Moderator
 Re: VAC Case value in reply to C. Amick, 03-08-2005 07:56:53  
Unfortunately, it has been setting outside, but exhaust etc. has been covered during this time.



[Log in to Reply]  [No Email]
C. Amick

03-08-2005 08:22:50




Report to Moderator
 Re: VAC Case value in reply to Kelly (KS) , 03-08-2005 08:13:51  
Do you live in a cold climate? I would check for engine freezing damage just in case water did get in. I would check to see if there is any coolant in the radiator and drain a little oil from the bottom of the oil pan to see if there is any coolant in the oil.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy