TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Case Tractors Discussion Forum

Parts numbers

Welcome Guest, Log in or Register

Author

caseman-d

02-24-2005 20:37:29

Report to Moderator

Rubber shift boot people like to pay 18.++ for on ebay you can get them from your case dealer using part # A26956 , Case list 10.92. Also:..... .fuel cap A26400 instock STPAUL
fuel cap gasket.... A31101 also in stock STPAUL. If your Case dealer won't order them send a email to parts@rushmore.com and use case parts as a subject.
caseman-d

[Log in to Reply] [No Email]

John Saeli

02-25-2005 10:17:52

Report to Moderator

Re: Parts numbers in reply to caseman-d, 02-24-2005 20:37:29

Hey caseman-d: You are fortunate to have a dealer sell @ List. Just checked with my dealer, $12.98 plus $5.00 shipping because they don't stock it. Then it's 18 miles to there to get it. We stock & sell the same boot from our store here for $15.00. The US made shift knob that we sell here for $3.49 is $17.54 plus shipping from the same dealer. They can't supply the switches that we sell for SC's & DC's.. My e-mail is unlocked if you want to order anything.

[Log in to Reply] [No Email]

caseman-d

02-25-2005 11:16:14

Report to Moderator

Re: Parts numbers in reply to John Saeli, 02-25-2005 10:17:52

What switch are you referring to??? I thought I had gotten the ignition switch for the D series awhile back. I will double check. If we order on a stock order we don't charge frieght. Just if we daily order it and ship it to the customer.
caseman-d

[Log in to Reply] [No Email]

John Saeli

02-25-2005 16:36:28

Report to Moderator

Re: Parts numbers in reply to caseman-d, 02-25-2005 11:16:14

Hey caseman-d: I was never offered the option of a stock order. Because they don't stock it, it was "special order". Probably a long wait for a monthly stock order. The switches I referred to are the Original style, exact duplicate, US made Ign. & Light Switches. We sell them here for $5.99 & $8.99.

[Log in to Reply] [No Email]

Paul f

02-25-2005 16:51:30

Report to Moderator

Re: Parts numbers in reply to John Saeli, 02-25-2005 16:36:28

John: Most dealers will let you place a stock order..most order weekly so it may take up to two weeks to get the part but it is a lot cheaper. You might try SC Hansen they have locations in south central NY and Albany and order on Wednesdays. Have done stock order with them for 3 years and usually takes less than 14 days....

[Log in to Reply] [No Email]

Joe (Wa)

02-24-2005 21:14:41

Report to Moderator

Re: Parts numbers in reply to caseman-d, 02-24-2005 20:37:29

Caseman, What model is the gas cap for? I ordered cap parts manual # G13271 from a Case dealer (fits VA series, 300, 300B & 400B). They cross-ref to D93757 and the cap had ears on like cheap junk from a cut rate auto supply. No way original, wouldn't even fit under the cover on the 311B.

Have you seen the A26400 cap? Is it like the original? I need 3 of them.

Thanks, Joe

[Log in to Reply] [No Email]

caseman-d

02-26-2005 18:30:09

Report to Moderator

Re: Parts numbers in reply to Joe (Wa), 02-24-2005 21:14:41

Make you guys a deal, I'll order a A26400 gas cap and if it's like the original you guys buy it from me. I'll send you a picture so you know what it lookas like in advance. Hows that for a deal! You can email me as I have opened my email or you can email me at parts@rushmore.com and use parts as a subject.
caseman-d

[Log in to Reply] [No Email]

Joe (Wa)

02-26-2005 19:10:30

Report to Moderator

Re: Parts numbers in reply to caseman-d, 02-26-2005 18:30:09

Ok, you're on. Late Vac & 300 series have the same cap. I will need 3. I have one original. Do you want me to e:mail pix?

Joe

[Log in to Reply] [No Email]

Joe Blahitka

02-26-2005 22:13:28

Report to Moderator

Re: Parts numbers in reply to Joe (Wa), 02-26-2005 19:10:30

Hi Joe: I also have the original gas cap for the Case 300 tractor. I would appreciate very much if you would post a picture of it so I can compare mine with yours. If it is the same, I will order 3 from caseman too! Joe

[Log in to Reply] [No Email]

Joe (Wa)

02-27-2005 15:19:12

Report to Moderator

Re: Parts numbers in reply to Joe Blahitka, 02-26-2005 22:13:28

Joe, I haven't had any luck posting a decent pix on this board, just too dumb I guess. I can fwd e:mail the pix that I sent to Caseman if you want, let me know. Note that the A26400 cap that he refers to is for S,D, LA tractors. May be the same cap, don't know.

Joe

[Log in to Reply] [No Email]

Joe Blahitka

02-27-2005 18:15:29

Report to Moderator

Re: Parts numbers in reply to Joe (Wa), 02-27-2005 15:19:12

Hey Joe: I you could email me the picture that you sent to Caseman, that would be great. My email is open. Thanks. Joe

[Log in to Reply] [No Email]

caseman-d

02-26-2005 20:49:11

Report to Moderator

Re: Parts numbers in reply to Joe (Wa), 02-26-2005 19:10:30

Joe,
Now the cap I'm referring to is for the S,D, LA tractors. Email me a picture and I will take a look at it,
caseman

[Log in to Reply] [No Email]

Joe Blahitka

02-25-2005 17:31:27

Report to Moderator

Re: Parts numbers in reply to Joe (Wa), 02-24-2005 21:14:41

Hey Joe: Are you going to order the three gas caps that you need Part Number G13271? I ordered them from my Case dealer and they were just as you described and made in Mexico. They have the little wings on top. If you are going to order, can you please let me know if they are original Case gas caps. I need three for my Case 311. Thanks. Joe

[Log in to Reply] [No Email]

Joe (Wa)

02-25-2005 18:39:55

Report to Moderator

Re: Parts numbers in reply to Joe Blahitka, 02-25-2005 17:31:27

When I left the dealership G13271 was on order, suppose to be a good nr. When the cap arrived a week later it was the elcheapo, p/n on the package was D93757. Didn't open it till I got home (90 mi). Could have been a temporary substitute.

Picked up cyl head torque extension CAS1257 at the same time $96 + S&H, it was Snap-on S8663B. I looked it up on the Snappy website $45 + S&H. The dealer probably bought it off the local truck.

I never went back, they handle nothing but rice burners now anyway.

I would sooner buy from someone who is honest like Saeli or Don L. I haven't bought anything from Caseman yet, but wouldn't hesitate one second.

Joe

[Log in to Reply] [No Email]

Old Eb

02-25-2005 19:42:35

Report to Moderator

Re: Parts numbers in reply to Joe (Wa), 02-25-2005 18:39:55

The thing Caseman has goin' for him (and his customers) is that he owns, uses, and works on his Cases. How many times have you been neck-deep in a repair & sure wished you could have the engineer there that designed your problem? Or the parts man that ordered it in knowing darn well it was a POS? I have been to the dealer too many times, in working on my old Cases, ordered a part, received it in and it was in fact the old elcheapo version - maybe a "universal" type part - which I maybe could have gotten anywhere. I agree with you on these ol' boys like John Saeli or Don L. - at least I know there parts have been hand inspected and are more than likely an exact duplicate of the original. (Which, by the way, is just as good as an original to me.) I haven't bought from Caseman and prolly will someday just 'cause I think he is ahead of the curve on most parts guys, but I think John & Don & Ted deserve our business too. Where else you gonna get some of these parts?! Whether they are made here or not it is still the old-fashioned American way - find a niche & fill it.

Sorry - I'll get down now. :)

[Log in to Reply] [No Email]

John Saeli

02-26-2005 05:38:06

Report to Moderator

Re: Parts numbers in reply to Old Eb, 02-25-2005 19:42:35

Well said Eb. I appreciate the support from all of you. One thing to remember, we all have a common bond, CASE, & the desire to preserve them. Men like Don L., Ed Axthelm, CASEPOWER,a bunch of others, & myself are just family men, trying to make a living. I've sent customers to all the above mentioned, & they've sent customers my way.

[Log in to Reply] [No Email]

caseman-d

02-25-2005 06:05:18

Report to Moderator

Re: Parts numbers in reply to Joe (Wa), 02-24-2005 21:14:41

Joe,
Sorry I forgot to list what there for. The rubber boot fits most of the older tractors from the S series-800B and probably a few others. The gas cap is for the D series . Should also fit the S series.
caseman-d

[Log in to Reply] [No Email]

Joe (Wa)

02-25-2005 11:44:30

Report to Moderator

Re: Parts numbers in reply to caseman-d, 02-25-2005 06:05:18

Thanks for the info. Joe

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy