Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

she made it home

Welcome Guest, Log in or Register
Author 
Puttz

02-20-2005 17:10:15




Report to Moderator

third party image

Well she made it home. But not without incident.

I had stopped by the site where it has been sitting last week and tried to get it turned around with a big pickup and chain.

I hooked the chain to the wheel to get them spun in my direction and tore the spindle right off the hub.
Seems that someone either hit a rut and spun the whole pitman arm assy way askew, or someone had tried to fix something and gotten confused during assy.

Cause If I turned the steering wheel to the right the tires pointed left. And apparently they have no intention of going to the right till I dig into it and find out why the pitman arm on the steering box is pointed the wrong way.

Oh well with a compact excavator I was able to lift the front end out of the ruts and drag it/them as a pair onto the transport.

It's got a little box scraper that came along also.

The Hydraulics have two levers

one raises and lowers the bucket boom. Dumping is done with a latch release. And the bucket just swings down.

And the other runs a set of cylinders that run below the tractor midsection that operates a fulcrum and raises two lift arms of the hitch.

This slug is all in all pretty heavy.

Perhaps someone can tell me the year model

It's a VAI 5162077

[Log in to Reply]   [No Email]
dctom

02-20-2005 17:23:37




Report to Moderator
 Re: she made it home in reply to Puttz, 02-20-2005 17:10:15  
it is a 1947 sounds like some one put a vac stearing gear on it, that would do what you say turn right and it goes left, must find a gear box from a va tom



[Log in to Reply]  [No Email]
Puttz

02-20-2005 17:30:08




Report to Moderator
 Re: she made it home in reply to dctom, 02-20-2005 17:23:37  
Thanks for the year.

It looks fishy because the pitman arm looks like it flew way up ( and actually overcentered) and took out some funky fuel line at the same time. But I'll make note of that.



[Log in to Reply]  [No Email]
Puttz

02-21-2005 13:12:21




Report to Moderator
 Re: she made it home in reply to Puttz, 02-20-2005 17:30:08  
Well it had over centered really far.

Now I'm looking for a spindle.

Or, I arc weld it back on, and grind it down



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy