Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

Question for DC Tom.

Welcome Guest, Log in or Register
Author 
Scott KY

02-18-2005 18:08:52




Report to Moderator

Can you tell me if DC serial # 4302874 came from the factory with electric starter and lights?




[Log in to Reply]   [No Email]
dctom

02-20-2005 16:05:51




Report to Moderator
 Re: Question for DC Tom. in reply to Scott KY, 02-18-2005 18:08:52  
scott yes it was 4302874-dc-3 was built july 27 1939 shipped to j i case company kokomo, indiana july 27 1939 starter and lighting atachment 5.50x16 front, 10x36 rear good year tires tom



[Log in to Reply]  [No Email]
Scott KY

02-20-2005 18:16:30




Report to Moderator
 Re: Question for DC Tom. in reply to dctom, 02-20-2005 16:05:51  
Thanks Tom



[Log in to Reply]  [No Email]
caseman-d

02-18-2005 20:29:23




Report to Moderator
 Re: Question for DC Tom. in reply to Scott KY, 02-18-2005 18:08:52  
third party image

Scott,
If dctom see this he should be able to answer that question. I got a 39 DC a few weeks ago, my serial number is 4303371. Mine has a cover installed where the starter goes. I havent pulled it to see if it has a ring gear on the flywheel. I am curious, does yours have a 4 speed transmission.

man70/39%20DC/078899d5.jpg>

[Log in to Reply]  [No Email]
Scott KY

02-19-2005 18:21:41




Report to Moderator
 Re: Question for DC Tom. in reply to caseman-d, 02-18-2005 20:29:23  
Mine has a 4 speed transmission. The generator is on the left side and is belt driven. That leads me to believe that the starter and lights were added later. Maybe DC Tom can tell me. I could sure use the bottom cover for the instrument panel I see in one of your pictures. Are you going to restore your tractor?



[Log in to Reply]  [No Email]
rgorange

02-19-2005 04:27:14




Report to Moderator
 Re: Question for DC Tom. in reply to caseman-d, 02-18-2005 20:29:23  
Caseman,
If it does not have 4th gear it may have come from the factory on steel wheels. This was not uncommon before the mid 40's. McCormick tractors had a plate that was removed if you converted to rubber, to make high gear available. Don't know if this is true of Case. DCTom will know.
rgorange



[Log in to Reply]  [No Email]
caseman-d

02-19-2005 17:36:06




Report to Moderator
 Re: Question for DC Tom. in reply to rgorange, 02-19-2005 04:27:14  
rgorange,
Thanks for the reply. I have been visiting with Tom conscerning some other serial numbers. One of the DC in question was the 1308 tractor made in the D series according to info from Tom.This kind of has Tom stumped as the serial numbers are way above the first 500 and what was beleived to be just the D's that had the 3 speed. A couple of ideas Tom and I had were that they may be 4 speeds with 4th not being shown and the second was the possibility of them coming out with steel and 4th was left out for that purpose. We do not know this to be true. We are just speculating. Only thing we know for sure is that they are over the 1000 production of the D series on the 2 that we know of. Will be interesting to see what becomes of this. Maybe a missing link in Case history.
caseman-d

[Log in to Reply]  [No Email]
rgorange

02-19-2005 18:01:34




Report to Moderator
 Re: Question for DC Tom. in reply to caseman-d, 02-19-2005 17:36:06  
Caseman,
In my book "Illustrated Case Tractor Buyer's Guide" by Peter Letourneau chapter 6 gives 3 star rating (very good investment) for the model D and DC-3 1939 model
"only if built with three-speed transmission. Total of 500 Ds and DCs began production as Cs, yet left the factory as Ds. All reportedly shipped to Canada."
Rubber tires were optional on early models.
Later it says "The first 500 units of the new D Series were built with the C Series three-speed transmission. Within the first few months of production, a four-speed transmission became standard."
According to this book, quantities built in 1939 were:
DH 59
D 1162
DC-3 2564
DC-4 143
DO 66
rgorange

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy