Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

VAC 14 follow up (Joe)

Welcome Guest, Log in or Register
Author 
Keith-OR

02-16-2005 19:05:08




Report to Moderator

Thought I would let you know trans was over filled, no water in oil, and hydraulic oil level was below the level of trans, so they just over filled the trans, rear end. Drained it down to proper amount. Thanks Augie and Joe!!!!!




[Log in to Reply]   [No Email]
Joe (Wa)

02-16-2005 21:53:16




Report to Moderator
 Re: VAC 14 follow up (Joe) in reply to Keith-OR, 02-16-2005 19:05:08  
Yabut Keith look at all the fun ya missed not splitting that thing and changing the shaft seal.
Heck Augie done gave you the part nrs and you already thought about doing it so the job's more than 50% done anyway :^)

Joe



[Log in to Reply]  [No Email]
LMAO...Joe

02-16-2005 22:37:13




Report to Moderator
 Re: VAC 14 follow up (Joe) in reply to Joe (Wa), 02-16-2005 21:53:16  
Would be 100% done if I load it up and haul it up to you also :>) LMAO..... .Keith



[Log in to Reply]  [No Email]
Joe (Wa)

02-17-2005 10:13:31




Report to Moderator
 Re: VAC 14 follow up (Joe) in reply to LMAO...Joe, 02-16-2005 22:37:13  
Nope, trailering a tractor puts you back to square one. Now if you was to drive it up here.....

Yesterday I popped the head off the 310 that I bought in Dec. The previous owner had a valve grind done and let it set for 2 years. It has a divot broke out along side the #1 exh valve seat. Guess those cyl head people never heard of dry ice. Really a shame, new seats, guides, and valves and then destroy the head assembling. Ain't no wonder us old geezers insist upon doing our own repairs.

Joe

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy