Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

I feel the need for speed

[Show Entire Topic]  

Welcome Guest, Log in or Register
Author 
Paul f

02-02-2005 17:31:09




Report to Moderator

Rev John: If you are into speed Case's aren't for you. JI Case wanted to protect us all from errant farmers barreling doenw th road on their tractors at excessive speed (any thing over 10mph)..I even remember a vintage Case ad that pointed out that as a safety feature. That said a DC on rubber is only good for 10.4mph..according to my operators manual a D on steel was 9.36. After listening to the gear noise in 4th on my DC3 I don't try for any land speed records...(according to the builders card the release of my tractor was delayed while bull gears etc. were replaced because of excessive noise...they must have needed ear protection...

[Log in to Reply]   [No Email]
Roger (Mi)

02-04-2005 05:10:23




Report to Moderator
 Re: I feel the need for speed in reply to Paul f, 02-02-2005 17:31:09  
There was an agreement among tractor manufacturers to limit the top speed of farm tractors primarily for safety reasons. Most tractors have a high center of gravity and are prone to tip over in sharp turns at higher speeds. In the early years of tractor building, there were tractors that could exceed 40 MPH. MM had one that was advertised as plow in the morning and take the family to town in the afternoon. Additionally, any speed beyond 8 MPH on a tractor on steel is an experience few would be willing to endure.

[Log in to Reply]  [No Email]
todd hamilton

02-02-2005 20:11:07




Report to Moderator
 Re: I feel the need for speed in reply to Paul f, 02-02-2005 17:31:09  
I thought that the SC was the only model that whined and knocked in 4th gear!:^) However, it is a great tranny for working. I marvel at how easy it shifts whenever I plow snow with mine. I flushed the transmission with kerosene a few years ago and filled it with new 85W140. It really helped it a bunch - settled some of the noise down in 4th gear. You get a lot of time to enjoy the beauty of the landscape when riding a Case through the countryside.

[Log in to Reply]  [No Email]
Camboted

02-03-2005 02:42:22




Report to Moderator
 Re: I feel the need for speed in reply to todd hamilton, 02-02-2005 20:11:07  
Hey Todd, you, and all of you SC and DC collectors, really should take the back end off and check your chains. All of the DC's weve been re-manufacturing had loose chains, two were actually wearing groves in the bottom of the gear case. It dosn't take that long, and it will really quiet things down, if your bearings are good.



[Log in to Reply]  [No Email]
[Show Entire Topic]     [Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy