Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

770 powershift

Welcome Guest, Log in or Register
Author 
Steven

01-23-2005 08:32:07




Report to Moderator

Yesterday I heard 2 guys talking about the powershift on a 770 tractor. Was told not to run the PTO while the tractor was in reverse. My neighbor uses his on his whirly mower, and backs up alot. Is this bad? I told him I'd check this out. Please explain this to me. Thanks guys.




[Log in to Reply]   [No Email]
turbo

01-23-2005 16:35:08




Report to Moderator
 Re: 770 powershift in reply to Steven, 01-23-2005 08:32:07  
Of more concern to me knowing how they work was this. The live power shaft runs down the center of the powershift output shaft on all models. Reverse is 1 to 1 ratio engine RPM clockwise at the rear of the powershift. The live shaft is 1 to 1 ratio engine RPM counter-clockwise. At the rear of the powershift output shaft, the live shaft floats on bushing with limited lubrication. At 2000 RPM in reverse, continuous stationary operation, 4000 RPM.

[Log in to Reply]  [No Email]
just rooy

01-23-2005 09:16:34




Report to Moderator
 Re: 770 powershift in reply to Steven, 01-23-2005 08:32:07  
The only thing you do not want to do is leave it in reverse when doing stationary pto work as the planatary turns some 4 times the engine speed the oposite way when in reverse. To back up with the pto engaged such as using a mower will not hurt a thing.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy