Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

Case 1070

Welcome Guest, Log in or Register
Author 
John Hobby

12-06-2004 11:43:02




Report to Moderator

I have a line on a 1070 for $9,500.00. It looks good and I will go see it. Can anyone give me the pro's and con's to this series, horse power, years made, etc. I was looking for a IH 966 or 1066 but this look nice and possibly might go that way.




[Log in to Reply]   [No Email]
jayj

12-07-2004 20:38:56




Report to Moderator
 Re: Case 1070 in reply to John Hobby, 12-06-2004 11:43:02  
I HAD A 1070 PRO STOCK PULLER AND USED ETHER EVERY TIME WE STARTED IT AND NEVER HAD ANY PROBLEMS. YOU HAVE TO KNOW HOW TO TO USE IT. IT DOES NOT MATTER THE COLOR OF THE TRACTOR. A



[Log in to Reply]  [No Email]
Leland

12-07-2004 20:10:23




Report to Moderator
 Re: Case 1070 in reply to John Hobby, 12-06-2004 11:43:02  
For that kinda of money it better be freshly rebuild from fan blade to pto shaft with papers. I agree even $5000 is pushing it.



[Log in to Reply]  [No Email]
nb

12-07-2004 06:09:14




Report to Moderator
 Re: Case 1070 in reply to John Hobby, 12-06-2004 11:43:02  
That is a high price.Most around here go for 3500 to maybe 6000 for real nice ones. We have a nice '78 model, and it has been a good tractor. They are about 105 to 110 hp. I don't know what John means that the don't like ether. We use it on ours when it gets cold from time to time with no problems. I would suggest, however, as with any diesel, to have a block heater for cold starting.



[Log in to Reply]  [No Email]
John Saeli

12-07-2004 16:58:53




Report to Moderator
 Re: Case 1070 in reply to nb, 12-07-2004 06:09:14  
Hey NB: Keep using it. I guarantee you will experience 1 of the following: Blown head gasket,(If you are lucky); Cracked head(s) or cracked sleeve. Do you have to add coolant in the Summer?



[Log in to Reply]  [No Email]
Hayman

12-08-2004 12:20:46




Report to Moderator
 just have to know how to use it in reply to John Saeli, 12-07-2004 16:58:53  
We've used many cans of either on our old 970 and 2090 case bieng that we live in a northern climate. The ground is frozen 6 months of the year! The 970 we've had for 30 years and the engine is still original.

I will say I could go outside right now and with enough either I could screw it up or any diesel for that matter. I did a number one time on our old MF 90 with too much either! We were impatient and careless that day. So then we had fun doing a head gasket!

As for the 1070 in general they were probably one of Case's best tractors in the 70's. They are still very popular around here. They bring around 10K cdn. if in decent shape. REally nice ones with low original hrs. will sell for more, beat up ones sell for less.

[Log in to Reply]  [No Email]
John Hobby

12-09-2004 07:18:00




Report to Moderator
 Case 1070 parts in reply to Hayman, 12-08-2004 12:20:46  
Well,

I will be looking ta one soon. I spoke with the owner and he give it good reviews. He is selling it because he says everything he owns has a price and what the heck. The AC has been gone through and he bales 140 acres with it, so that is what I will do also.

How about parts, still avail from Case IH ?



[Log in to Reply]  [No Email]
Hayman

12-09-2004 10:08:03




Report to Moderator
 parts no problem in reply to John Hobby, 12-09-2004 07:18:00  
I've never had any problems with parts on the 70 or 90 series Case's. How old is this 1070 is it a white cab one?

There is thousands of the 970-1070's etc. in daily use still. They are very popular around here now for haying/chore tractors.

Make sure this guy isn't wasting your time. If its far away try and get him to send you some pictures by e-mail. I've been burned serveral times going to look at farm machinery where the seller was claiming it to be in excellent shape. They were asking top dollar so one figures it must be really good. Yet when I went to look at it was a piece of junk that hadn't had any up keep over the years. Then they are offended when you tell them they are misleading people on the phone!!!

They are good old tractors but like anything if abused and not taken care of will be a money pit. My 970 has been very good tractor over the years. I really like it for haying. I'd like another and I've been watching for a low hour one at farm auctions.

[Log in to Reply]  [No Email]
John Hobby

12-09-2004 10:17:32




Report to Moderator
 Re: parts no problem in reply to Hayman, 12-09-2004 10:08:03  
The tractor is a oragen belly white metal with a white cab. Look like from th epix there are two light on each sid eover each other, light on rear fender and flasher above on rear of cab. There is a rear view mirrow ( maybe after market ) on left side, black stickers, with 1070 in front. This is about 1.5 hourse from me so I will look and drive. Did David Brown have anything to do with these. I have a friend with a Case with the same color and it is a DB

[Log in to Reply]  [No Email]
Hayman

12-09-2004 14:48:44




Report to Moderator
 Re: parts no problem in reply to John Hobby, 12-09-2004 10:17:32  
No the 1070 is not related to a David Brown. Its a 100% USA built tractor! How many hrs. on this tractor??



[Log in to Reply]  [No Email]
John Hobby

12-23-2004 03:15:27




Report to Moderator
 More Case info in reply to Hayman, 12-09-2004 14:48:44  
Hayman,

There were 7,400 hours. The trator looked real dry around the motor. There were 4 speeds plus three speed for each. The owner sai that when baling, if yu touch the brake, the tractor will down shift on gear automatically. The rubber looked good, say 70%. The tin, cab and general condition looked good. The tire were not filled (good for me, hay only). It is a big tractor compared to today's stuff. Dual outlet, adjustable steering wheel. Not bad. The battery was dead so we could not start it, it is cold here in the NE. Thanks in advance and merry xmas.

[Log in to Reply]  [No Email]
John Hobby

12-10-2004 08:21:07




Report to Moderator
 Re: parts no problem in reply to Hayman, 12-09-2004 14:48:44  
I was told it is a 1975 with I think he said 6,000. I will look at it soon. I will get the serial # and stuff.



[Log in to Reply]  [No Email]
nb

12-08-2004 06:11:37




Report to Moderator
 Re: Case 1070 in reply to John Saeli, 12-07-2004 16:58:53  
No, I check that many times, and never had to add any. We have an 870,970,1070, anh two 1370's and all have had ether used on them on ocaision. We had a 1030 and it needed ether as soon as the temp. was below 50. Did that for 15 yrs. and never had a problem. We are just very careful with the amount we use. Like I said in my other posting, a block heater is certianly better and safer for the engine.

[Log in to Reply]  [No Email]
Thad

12-06-2004 16:08:01




Report to Moderator
 Re: Case 1070 in reply to John Hobby, 12-06-2004 11:43:02  
I have to agree with John the price seems very high. In my area i cant hardly get 8000 to 8500 out of one. Thats only if it was a very late one with everything working. They are a very good tractor burn very little fuel for the power they have. Thad



[Log in to Reply]  [No Email]
John Saeli

12-06-2004 15:59:29




Report to Moderator
 Re: Case 1070 in reply to John Hobby, 12-06-2004 11:43:02  
Hey John: Good Tractor. 12 speed Power Shift was a popular Option, otherwise it would have an 8 speed tranny. $9500 is high for a 1070, I think. If there is an ether can in the tool box, I'd walk away for sure. CASE engines don't like ether.



[Log in to Reply]  [No Email]
John Hobby

12-07-2004 06:45:02




Report to Moderator
 Re: Case 1070 in reply to John Saeli, 12-06-2004 15:59:29  
Thanks guys for the follow up. Either cans and desiels should never mix, even if they were designed to. I will check the tractor out and let you know. Thanks



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy