Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

CC main crank belt pully

Welcome Guest, Log in or Register
Author 
Jack1

11-26-2004 14:30:24




Report to Moderator

The 8" dia. belt pully on the main crank is rusted off on one side. Its has two seperate sides bolted through a cast center. Are replacement pullys avalible or does anyone have any ideas for a repair. Also, does anyone know the belt size for a replacment?




[Log in to Reply]   [No Email]
Just Roy

11-27-2004 05:50:48




Report to Moderator
 Re: CC main crank belt pully in reply to Jack1, 11-26-2004 14:30:24  
I went to a hardware store , bought a 8 inch pully with a hub, cut the hub out and drilled the bolt holes in it and made mine. been on there for five years or so now.



[Log in to Reply]  [No Email]
Tom Railsback

11-26-2004 18:11:29




Report to Moderator
 Re: CC main crank belt pully in reply to Jack1, 11-26-2004 14:30:24  
I checked a few years ago and the O3290AB flanges are no longer available. I guess that's something else we need to find someone to reproduce. In the meantine, a pulley off a D series will work fine; it's all one piece.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy