Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

case cotton pickers

Welcome Guest, Log in or Register
Author 
jess in ca

11-13-2004 17:03:48




Report to Moderator

does anyone out there in case land have any info on the cotton pickers.

jess in ca




[Log in to Reply]   [No Email]
Harold H

11-16-2004 12:35:59




Report to Moderator
 Re: case cotton pickers in reply to jess in ca, 11-13-2004 17:03:48  
Jess,

I don't normally check this board but happened to see your post. Case never made a cotton picker. They may have made a stripper but I am not sure. International, John Deere, Allis Chalmers, and Rust (Ben Person) were the only production cotton pickers ever in the United States. John Deere used the IHC design with tapered barbed spindles, and Allis Chalmers used the Rust design with straight splinded spindles. In Mississippi Delta IH was number one with John Deere second. Across the river in Arkansas IHC and JD were the most popular, but there were also quite a few Rust (Ben Person) cotton pickers as these pickers were built in Pine Bluff, Arkansas. I think Allis Chalmers cotton pickers were mostly found out your way. Several companies made cotton strippers but I don't know all as we never used cotton strippers in the Mississippi Delta.

Harold H

[Log in to Reply]  [No Email]
jeff-AR

11-30-2004 20:13:11




Report to Moderator
 Re: case cotton pickers in reply to Harold H, 11-16-2004 12:35:59  
Harold, I agree that IHC and Deere cotton pickers were king in Arkansas. Even though the Rust was built in Pine Bluff, it was never popular. I was always told that they were shipped to California. Even today there are a lot of junked IH and JD machines but no Rust or ACs around here. I have seen pictures of a Dearborn one row picker to fit the NAA series Fords, but never a real one. The tractor used a wide front and the spindles sat to the right of the rear tire. The basket sat on the left side instead of centering the tractor. The tractor drove forward, instead of reverse like JD and IH. I think the small basket would limit its use.

[Log in to Reply]  [No Email]
jess in ca

11-16-2004 23:24:54




Report to Moderator
 Re: case cotton pickers in reply to Harold H, 11-16-2004 12:35:59  
Harold,
your probally right that its a stripper,
the photo is in the cotton section of (the
world book encyclopedia )(C)early 60"s.
some more odd stuff is oliver picker/
strippers, and hesston strippers,
now somebody of MM decent told me he thought
MM made a stripper?? also i heard of a dearborn picker... love to see one. i did see
a few A C pickers around here. a good friend of
mine"s dad had a model 622. it was cut up for junk in 74, i still have the parts book for it.
harold i ve been collecting info on pickers off and on for years, but recently i have been
gathering all the info that i can.. in the near future i would like to do a book on
cotton pickers and strippers, mabey even those
old yellow cotton scrappers we use to see 30 years ago going down the side of the road, made by rood co,i would like to find one, there use
to be quite a few around here.I"D love to find a JD # 1 model.jess in ca. [email protected]

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy