Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

VAC value. has hydraulic lift

Welcome Guest, Log in or Register
Author 
Gary Main

06-28-2004 18:03:42




Report to Moderator

so its a 49 or later right? its all there, tin dented but not rusted, has flip hood. block repaired as usual, rubber good, starts and runs perfect. fresh paint of course.




[Log in to Reply]   [No Email]
Robert Pence

06-28-2004 18:35:42




Report to Moderator
 Re: VAC value. has hydraulic lift in reply to Gary Main, 06-28-2004 18:03:42  
Gary, I think it's in '49 that they put Eagle Hitch on the VAC's. Earlier models had hydraulics, but not Eagle Hitch. I don't know when they put hydraulics on the VAC, but my '48 has them, and I'm sure they're factory. The pump is driven off the belt pulley shaft on mine.

To find your year, I think you use the same formula as on the SC and DC; take the first two digits of the serial number, and subtract 4.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy