Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

Speaking of old Case part numbers...

Welcome Guest, Log in or Register
Author 
Mike Schotte

05-14-2004 18:00:26




Report to Moderator

Hi Guys,

The thread below about the troubles with getting CASE parts from a Case/IH dealer reminded me of a question that's been rolling around in my brain for awhile:

I've heard John Saeli, DCTom, Bruce Nelson, Don L. and other folks say from time to time that Case part #'s start with a 'O' instead of a '0' (zero).

Now- I've gone and LOOKED at plenty of J.I. Case parts manuals... and those sure look like numbers instead of letters to me. The reason that I think this because they are printed JUST the same as zeroes that occur later in the very same part number.

Is it possible that these Case part numbers originally started with zeroes... and they changed them to 'O's after the Case/IH merger to signify "old" part numbers?

Somebody please 'splain if you can- because this has always confused me. It sounds like caseman-d might just know the answer...

-Schotte

[Log in to Reply]   [No Email]
John Saeli

05-14-2004 18:22:28




Report to Moderator
 Re: Speaking of old Case part numbers... in reply to Mike Schotte, 05-14-2004 18:00:26  
Hey Mike: OK Young Feller: Here it is. From day 1, always was,; That "O" is the letter "O", not ZERO. This is where a lot of people run into problems @ their favorite dealership, cause them young whipersnappers punch in ZERO instead of "O" OH!!



[Log in to Reply]  [No Email]
Mike Schotte

05-14-2004 18:34:29




Report to Moderator
 Re: Re: Speaking of old Case part numbers... in reply to John Saeli, 05-14-2004 18:22:28  
I believe you, John... I've heard it enough times to know that it's true- but just LOOK at this pic:

The 0 at the beginning of the part number is the same as the 0 in the middle of the part number, and the same as the 0 in "10" in the description.

Can't you see how they aren't exactly making it obvious??

third party image

-Schotte

[Log in to Reply]  [No Email]
Joe (Wa)

05-14-2004 19:30:43




Report to Moderator
 Re: Re: Re: Speaking of old Case part numbers... in reply to Mike Schotte, 05-14-2004 18:34:29  
Mike, go up to the top left of the page down below the word RADIATOR.

O6391AB CONTROL-1
O6392AB LEVER-1
04205AB SPRING-1

2 of 3 are letter "O".

Down in the parts list they are all digit "0".

Far as I can tell, most all the old numbers start with letter "O" as John said.

When you go to a Case dealer have them try it both ways. Better yet if you can cross-ref to a newer part number you won't hear "no longer available" so often.

Most dealers can cross a newer number back to the old number to confirm it is the right part but can't get off the starting line with the original number.

Joe

[Log in to Reply]  [No Email]
Slowpoke

05-16-2004 00:20:30




Report to Moderator
 Re: Re: Re: Re: Speaking of old Case part numbers. in reply to Joe (Wa), 05-14-2004 19:30:43  
Looks to me like a zero. Notice the letters are at the end of the number. I wouldn't be surprised if the system was changed for later models to letters first because of the confusion. And at the same time they dropped the 0/o.



[Log in to Reply]  [No Email]
todd hamilton

05-14-2004 19:24:12




Report to Moderator
 Re: Re: Re: Speaking of old Case part numbers... in reply to Mike Schotte, 05-14-2004 18:34:29  
Looks like zeros to me.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy