Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

va series manifolds help!!!

Welcome Guest, Log in or Register
Author 
mike

04-22-2004 11:23:47




Report to Moderator

can anyone tell me if the manifolds are the same or are they different on a 47 vai vs a 50 vac i was told they didnt change much until 53 or4 i sold one on ebay and i advertised it for a vai guy bought it for a vac and i told him i thought it would be the same but wasnt sure now he says it dosnt fit can anyone clarify this thanks mike




[Log in to Reply]   [No Email]
Brian Lambert

04-23-2004 06:20:23




Report to Moderator
 Re: va series manifolds help!!! in reply to mike, 04-22-2004 11:23:47  
Looking at parts books for both vai's and vac's, they are the same part numbers. There were basically 3 manifolds made; the vt-128 boxed runner one piece, the vt-330 exhaust/vt-329 intake round runner two seperate manifolds parts, and the vt-284/vt-283 low cost fuel(gas/kerosene) manifold.



[Log in to Reply]  [No Email]
Joe (Wa)

04-22-2004 19:21:49




Report to Moderator
 Re: va series manifolds help!!! in reply to mike, 04-22-2004 11:23:47  
Mike, Manifold part numbers changed with engine serial numbers. Basically if the engine serial number starts with a "V" old style, starting with an "A" or a digit new style.

It is not really a year thing, but the serial number marking method appears to have changed along about 1949-50.

Joe



[Log in to Reply]  [No Email]
Joe

04-22-2004 13:15:51




Report to Moderator
 Re: va series manifolds help!!! in reply to mike, 04-22-2004 11:23:47  
Mike,
The VA series parts, including engine and manifold were pretty much interchangeable between models VAC to VAI to VAO, etc. from 1942 to 1949. 50 was the year that they started making changes. You didn't cheat the guy, just was misinformed. Joe



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy