Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

Hey, Wade!

Welcome Guest, Log in or Register
Author 
Jim Handke

04-16-2004 18:35:23




Report to Moderator

In the replies on your previous post, Brent was right. I found out today that the pistons we have been installing were the ones he was talking about. If your seals on your powershift were one piece, with a steel wire to expand them, throw them out. They were a joke. The new pistons are cut a little wider, and use a black rubber back-up ring and a neoprene seal ring. These are really dependable. I hope you haven't bought the old style ones and have started to re-assemble the powershift. We got an 870 in last year that had been repaired with the old style, and the clutches were destroyed again. They may be a cheap repair right now, but it will be costly down the road. Hope I caught you in time.

[Log in to Reply]   [No Email]
Wade

04-17-2004 06:47:33




Report to Moderator
 Re: Hey, Wade! in reply to Jim Handke, 04-16-2004 18:35:23  
Thanks for the good information. I have already installed the old style. We've had the tractor for over 25 years this is the first problem. If these seals last half as long I'll be retired. We use this tractor for light pulling now. Thanks to you and everyone for the all the information. Wade



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy