TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Case Tractors Discussion Forum

carburetor overhaul

Welcome Guest, Log in or Register

Author

Bill

02-07-2004 08:26:18

Report to Moderator

Who out there does a good job of carburetor overhaul for a reasonable price. Have two zenith off of a so and a sc. Thanks

[Log in to Reply] [No Email]

Bill

02-07-2004 14:52:06

Report to Moderator

Re: carburetor overhaul in reply to Bill, 02-07-2004 08:26:18

Thanks guys for info, but i can't pull up a dave reed to order a tisco kit. What am i doing wrong?

[Log in to Reply] [No Email]

Bill

02-07-2004 14:55:39

Report to Moderator

Re: Re: carburetor overhaul in reply to Bill, 02-07-2004 14:52:06

Thanks for info on carb but can't get dave reed to order a tisco kit Thanks

[Log in to Reply] [No Email]

Mike Schotte

02-07-2004 15:25:57

Report to Moderator

Re: Re: Re: carburetor overhaul in reply to Bill, 02-07-2004 14:55:39

Bill,

It worked fine for me cutting and pasting the address I gave you-

But here: try a "clickable" link.

-S.

Otto Gas Engine Works

[Log in to Reply] [No Email]

Dave

02-07-2004 13:33:06

Report to Moderator

Re: carburetor overhaul in reply to Bill, 02-07-2004 08:26:18

Bill,

If you want to do the leg work and get the parts, I can do it for you.

I have done three sc carbs, what I do is boil them out in a soulution I make at work. I boil the carb and clean everything out blow air through all the passageways. and reassemble the carbs.

On all the carbs I have done, one from a 45, 46, and numerous lawn and garden carbs, they have all come out really good.

The best thing about it is I will do it VERY reasonable, if you send the parts I will rebuild them at a price you will be more than happy with.

just e-mail me and we can work somthing out if you want. I'm thinkin' maybe 20 bucks/carb.

Dave lookin for a sc w/eagle,livehyd/pto

[Log in to Reply] [No Email]

Mike Schotte

02-07-2004 11:20:28

Report to Moderator

Re: carburetor overhaul in reply to Bill, 02-07-2004 08:26:18

Bill,

If you want to do it yourself- these two archive posts might help you.

-Schotte

SC carb kit info

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy