Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

Hey Todd Hamilton!!

Welcome Guest, Log in or Register
Author 
John saeli

02-01-2004 10:37:25




Report to Moderator

Hey Todd!! Who says you can't upshift an "SC"? I upshift the "SC", "DC" "730","1175", downshift if I have to. Even the ol'e "H" from 4th to 5th. You have to keep in mind the ratio between gears. The "H" takes quite a pause because of the gap between 4th & 5th. Double Clutch is a must. I'm talking on the road or driveway of course.




[Log in to Reply]   [No Email]
todd hamilton

02-01-2004 11:12:18




Report to Moderator
 Re: Hey Todd Hamilton!! in reply to John saeli, 02-01-2004 10:37:25  
Me again - just for the record I can upshift an IH 656, 886, 1066, 1466. The SC just doesn't seem to like it - thought the horizontal 2nd reduction shaft with gears moving side to side might have something to do with gear mesh. As you can tell, I know little about transmissions as I have never torn one up or a clutch on anything - ever. Just a good driver I guess!:^)



[Log in to Reply]  [No Email]
todd hamilton

02-01-2004 10:56:30




Report to Moderator
 Re: Hey Todd Hamilton!! in reply to John saeli, 02-01-2004 10:37:25  
I don't have any luck with it but I can't split shift the grain truck either - just an over revin' redneck I guess!:^)



[Log in to Reply]  [No Email]
John saeli

02-01-2004 11:57:06




Report to Moderator
 Re: Re: Hey Todd Hamilton!! in reply to todd hamilton, 02-01-2004 10:56:30  
Hey Todd: I learned to double clutch when I was 6. Rode a '57 Reo Gold Comet bus to school everyday. I would watch the driver shift. Never, ever grind a gear. Oh!!, but the sub drivers could tear heck out of the ol'e Reo.. I'd tell our regular driver how bad the sub did the day before.



[Log in to Reply]  [No Email]
todd hamilton

02-01-2004 13:12:38




Report to Moderator
 Re: Re: Re: Hey Todd Hamilton!! in reply to John saeli, 02-01-2004 11:57:06  
My 1st cousin is the real farmer - I just own 40 acres that he farms. He has all the IH listed above. I help him whenever I can. His grain truck is a '78 GMC Tandem 5 speed trans hi/lo rear-end with a 366. Glass packs dump out under the cab. His truck is not bigger or faster than a lot of trucks at the elevator but we sure sound pretty coming into town with 525 bushels of corn on!:^)



[Log in to Reply]  [No Email]
DKase

02-01-2004 12:32:22




Report to Moderator
 Re: Re: Re: Hey Todd Hamilton!! in reply to John saeli, 02-01-2004 11:57:06  
Hey John; If you feel a need to relive your youth, Come to my house and drive my truck next fall for harvest. It is a 54 Reo Gold Comet. I use it daily. This one has the 5 x 2 syncro trans, power steering, air brakes, and the air ride seat, air up, and air down tag. If your legs are to long you will have trouble fitting in the cab though. Sure could use another driver some days.



[Log in to Reply]  [No Email]
John Saeli

02-01-2004 15:01:42




Report to Moderator
 Re: Re: Re: Re: Hey Todd Hamilton!! in reply to DKase, 02-01-2004 12:32:22  
Hey D Kase: Sounds like fun. Here on the farm I've got a '54 Dodge Model "Y". 11:00X20 Rubber. Big truck. '43 White Military 6 ton 6X6, 10 wheeler, and a 63 Mack F600. All have air brakes. All have grain boxes. If that tranny in the Reo is a syncro, it can't be original. The syncro takes all the fun out of it. Even my old Dodge is a 5 Sp. Crash Box. 2Sp rear axle. That REO is a double-clubber, right??

[Log in to Reply]  [No Email]
todd hamilton

02-01-2004 13:15:11




Report to Moderator
 Re: Re: Re: Re: Hey Todd Hamilton!! in reply to DKase, 02-01-2004 12:32:22  
very cool old truck! Dad and I had a '48 Willys pick-up we bought in 1979. When I graduated HS and went on to technical school he kept my truck!



[Log in to Reply]  [No Email]
Mike Schotte

02-01-2004 13:03:52




Report to Moderator
 Re: Re: Re: Re: Hey Todd Hamilton!! in reply to DKase, 02-01-2004 12:32:22  
Hi DKase,

I wasn't familiar with the model you were talking about, so I looked on the web. I've seen a Diamond REO before, but not a Gold Comet.

Ran across this '48 model for sale:
third party image

Looks like this guy has some neat old trucks-

-Schotte

[Log in to Reply]  [No Email]
John Saeli

02-01-2004 14:55:17




Report to Moderator
 Re: Re: Re: Re: Re: Hey Todd Hamilton!! in reply to Mike Schotte, 02-01-2004 13:03:52  
The old Reo I rode had the big square front end that Reo, and later Diamond-Reo used up to the end. I get as excited over big, old trucks as I do tractors. Not braggin, but I've driven almost every make of truck from A to W.



[Log in to Reply]  [No Email]
John H-WI

02-01-2004 18:42:28




Report to Moderator
 Re: Re: Re: Re: Re: Re: Hey Todd Hamilton!! in reply to John Saeli, 02-01-2004 14:55:17  
John, my old favorites were Mack, an H-67 with a 5 and 3 and the B-73 with the 5 and 3. Worst thing to drive was the old Diamond T with the 200 Cummins and split straight exhausts. Brother had a guy driving it who got banned from the Holland tunnel cause he vibrated some bricks loose.

Wish I had the $$$ to restore a B-61 twin screw to go around and haul tractors!



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy