Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

Hey, Les - Kerosene Venturi

Welcome Guest, Log in or Register
Author 
Mike Schotte

01-25-2004 23:43:41




Report to Moderator

Hi Les,

Just in case anybody's wondering what we were talking about before with ferrules and venturis- here's a pic of the all-fuel venturis out of a Case SC:

third party image

Did you decide to stay with the ferrules on yours?

-Schotte

[Log in to Reply]   [No Email]
Screamin DC

01-26-2004 08:34:17




Report to Moderator
 Re: Hey, Les - Kerosene Venturi in reply to Mike Schotte, 01-25-2004 23:43:41  
Ya, I found those inside the head when I popped the manifold off the DC. Got a question for you guys about them. I have been told that they help the air flow faster through the ports but for the room they take up I can't help but think they restrict the air flow. I'm building this DC into a puller and it is volatile that it breathes well. Any comments?



[Log in to Reply]  [No Email]
dctom

01-26-2004 11:29:21




Report to Moderator
 Re: Re: Hey, Les - Kerosene Venturi in reply to Screamin DC, 01-26-2004 08:34:17  
TAKE EM OUT AND PUT THE LITTLE THIN FURELS IN THE INTAKE, THAT WILL SMOOTH OUT THE AIR FLOW, THOES BIG ONES ARE FOR KEROSENE .



[Log in to Reply]  [No Email]
Mike Schotte

01-26-2004 11:20:10




Report to Moderator
 Re: Re: Hey, Les - Kerosene Venturi in reply to Screamin DC, 01-26-2004 08:34:17  
Don't get me to lying... I surely don't know much about the physics of engine design.

Having said that- I would think that the engine has to "breathe" the same amount- since the cylinders displace the same amount of air.

I think the venturis just increase the velocity of the air- the VOLUME of air would stay constant, I think.

I'm sure somebody more knowledgable than me will pipe up if I'm wrong...

-Schotte

[Log in to Reply]  [No Email]
FredCT

01-26-2004 20:21:58




Report to Moderator
 Re: Re: Re: Hey, Les - Kerosene Venturi in reply to Mike Schotte, 01-26-2004 11:20:10  
Mike, I believe that there is a difference in the amount of air because the cylinder head for the all-fuel was different from the gas burners. I don't know which had more or less compression. FredCT



[Log in to Reply]  [No Email]
Glenn FitzGerald

01-26-2004 04:43:52




Report to Moderator
 Re: Hey, Les - Kerosene Venturi in reply to Mike Schotte, 01-25-2004 23:43:41  
All this SC Case exhaust manifold talk. I'll be getting my SC in May. All this talk will probably make sence then! Glenn F.



[Log in to Reply]  [No Email]
Don L.

01-26-2004 04:37:40




Report to Moderator
 Re: Hey, Les - Kerosene Venturi in reply to Mike Schotte, 01-25-2004 23:43:41  
AKA "Trumpets of the GODS"!



[Log in to Reply]  [No Email]
Mike Schotte

01-26-2004 04:50:53




Report to Moderator
 Re: Re: Hey, Les - Kerosene Venturi in reply to Don L., 01-26-2004 04:37:40  
Hey Don,

You think I can make a Kazoo out of them?? (grin)

-Schotte



[Log in to Reply]  [No Email]
Don L.

01-26-2004 16:31:27




Report to Moderator
 Re: Re: Re: Hey, Les - Kerosene Venturi in reply to Mike Schotte, 01-26-2004 04:50:53  
Then yous could play,"Roll out the Ferrule" {barrel] tune. Ah one two three four.....
Don L.



[Log in to Reply]  [No Email]
Les...fortunate

01-26-2004 04:23:02




Report to Moderator
 Re: Hey, Les - Kerosene Venturi in reply to Mike Schotte, 01-25-2004 23:43:41  
Nope. The venturis are in it. Not going to tear it apart for that. Anybody want those ferrules?



[Log in to Reply]  [No Email]
Mike Schotte

01-26-2004 04:30:54




Report to Moderator
 Re: Re: Hey, Les - Kerosene Venturi in reply to Les...fortunate, 01-26-2004 04:23:02  
I'm still interested. Catch me quick before I'm broke again! (grin)

-Mike



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy