Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

Tiny cracks in 830 LP cylinder heads-questions?

Welcome Guest, Log in or Register
Author 
Tom in Mo.

01-19-2004 16:38:04




Report to Moderator

I have a pair of LP cylinder heads off an 830LP that were replaced on my tractor because magnafluxing revealed tiny cracks between the valve seats and the guide holes.
Is this something that I should not have worried about? Would the heads have been fine as is? If not, are they repairable? They are in great shape except for the tiny cracks so I haven't used them for weights yet.
The heads that I put on the tractor are in near perfect shape but cost me $200. EACH!

[Log in to Reply]   [No Email]
Don L.

01-20-2004 04:53:41




Report to Moderator
 Re: Tiny cracks in 830 LP cylinder heads-questions in reply to Tom in Mo., 01-19-2004 16:38:04  
The head people I work with all raised there prices, a two cyl head like that, to weld it is $200.00 min. Sometimes they can pin stitch is for about $35.00 a crack inch. Throw on shipping both ways also. Don L.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy