TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Case Tractors Discussion Forum

Hay Mike Schotte!

Welcome Guest, Log in or Register

Author

Fredct

01-16-2004 16:17:07

Report to Moderator

Mike, awhile back you asked about brass/bronze brake pedals on Case SC's - how's the data collection going? I have a '44 SC with brass pedals and I have run them through a wire wheel and they look great! That is how they will be installed when the rest of the tractor is done. Just check'n, FSB

[Log in to Reply] [No Email]

Mike Schotte

01-16-2004 17:21:23

Report to Moderator

Re: Hay Mike Schotte! in reply to Fredct, 01-16-2004 16:17:07

Hi Fred,

So far, I only have 4 or 5 tractor serial numbers recorded with the bronze pedals. That's been a long time- you are in my list, right?

I've got a rough idea of when they started and stopped. I'll keep narrowing it down as I find more.

Still want to find a set for myself someday.

-S.

[Log in to Reply] [No Email]

todd hamilton

01-16-2004 17:28:17

Report to Moderator

Re: Re: Hay Mike Schotte! in reply to Mike Schotte, 01-16-2004 17:21:23

Do you have a serial number list of 44s with the bronze pedals? I am pretty sure mine are not since where the paint is wearing it is shiny - I can inspect them more closely. No comment on my electrical lecture?

[Log in to Reply] [No Email]

Mike Schotte

01-16-2004 17:44:40

Report to Moderator

Re: Re: Re: Hay Mike Schotte! in reply to todd hamilton, 01-16-2004 17:28:17

Hi Todd,

Sorry for my delay in responding... I was trying to wolf down my dinner! (grin)

I'm afraid my list of 1944 SC's is very short right now, but here it is-

Case SC tractors with brass/bronze brake pedals:
(last updated 07/13/2003)

(Seems to be limited to 1944 production.)

Thad 4803420SC (bronze)
FredCT 4803440 (bronze)
Ebay auction - 4810016SC - (bronze)
FredCT 4810188 (cast iron)

Yes- I saw your post about the 6V/12V jump starting, and I agree whole-heartedly.

However, I'm certainly glad that you weren't around when I was taking my electrical engineering classes back in High School... I can only imagine what you would have done to me if you had caught me burning up resistors across the benchtop power supply or blowing up capacitors!

-Schotte

[Log in to Reply] [No Email]

todd hamilton

01-16-2004 18:21:46

Report to Moderator

Re: Re: Re: Re: Hay Mike Schotte! in reply to Mike Schotte, 01-16-2004 17:44:40

When we were in tech school we used to take a piece solder, form it into a U, and drop it into the A-C plugs on the top work benches in the lab. It would really pop - not too safe or smart!

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy