Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

CC piston types

Welcome Guest, Log in or Register
Author 
Thad

01-02-2004 17:39:25




Report to Moderator

I pulled the head on my CC today. The question i have is the pistons are down in the block about a 1/4 inch all the others i have ever had the head off of the pistons stuck out of the block. Im assuming that this must have been std and the others were the hi comp sets. Is that correct. If so no wonder a 4 inch hi comp set with a shaved 5505 head wakes them up. Also makes them fun to crank. Thad




[Log in to Reply]   [No Email]
RoyG

01-02-2004 21:09:21




Report to Moderator
 Re: CC piston types in reply to Thad, 01-02-2004 17:39:25  
You have the Tractor fuel pistons. I am sure that There were no gas pistons installed at the factory in A CC



[Log in to Reply]  [No Email]
dctom

01-03-2004 08:05:16




Report to Moderator
 Re: Re: CC piston types in reply to RoyG, 01-02-2004 21:09:21  
ROY, I THINK THEY CALLED THEM HIGH ALTITUDE PISTONS FOR THE CC AND EARLY DC, SAYS THAAT A LOT ON CARDS WHEN SHIPPED OUT WEST. ALSO LOT OF TRACTORS HAD CPL DONT KNOW WHAT THAT MEANS. ANY ONE HAVE AN IDEA< TOM



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy