Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

VAC-14 - NEED HELP

Welcome Guest, Log in or Register
Author 
Italy Hill Bill

12-30-2003 18:58:29




Report to Moderator

I needsome help. Have a 1956 VAC-14 sn 6002899) that appears to have spun a bearing last summer. Tried to pull the pan to check it out and it appears there is a bolt in the front of the pan that is inaccessable without pulling off the front axle assembly. Can't see the damn thing but can feel it. Sadistic engineers! The case book I have is useless for details. If I can get the pan off I can tel if it is worth fixing or getting rid of the rig. Been in the family for 20 years and been awork horse for all that time. Anyone out there that can advise as to how to get the thing apart without puling half the tractor apart? Problem is that I have a front pto bucket assy that is there as well. If I have to pull the whole thing apart, I will sell it. Not worth my time to become a VAC repair expert.

HELP!

[Log in to Reply]   [No Email]
Art

12-31-2003 06:36:07




Report to Moderator
 Re: VAC-14 - NEED HELP in reply to Italy Hill Bill, 12-30-2003 18:58:29  
I have a 46 VAI w/ a front end loader on it, and when I pulled the pan on mine, I clamped a 4x4 to the loader frame and used a come-along to raise the motor off of the pedistal about an inch to get those last two bolts out. If you don't have a loader frame on yours, maybe you can rig up some kind of a tripod or something similar. Good luck...Art



[Log in to Reply]  [No Email]
Dug G.

12-30-2003 19:19:54




Report to Moderator
 Re: VAC-14 - NEED HELP in reply to Italy Hill Bill, 12-30-2003 18:58:29  
I'm afraid that there is no way to get the pan off without taking the front end casting off. I'd love to find the engineer who made that design with the oil pump up in the way so the pan won't slide down. You may be able to angle a small mirror in the pan and see up, but it won't be a very good view. Oh yeah, if you do get a mirror angled in the pan, make sure you tie a string on it to pull it out if it slides outta rerach. Good luck.

Dug G.

[Log in to Reply]  [No Email]
mike's 600

12-30-2003 19:16:05




Report to Moderator
 Re: VAC-14 - NEED HELP in reply to Italy Hill Bill, 12-30-2003 18:58:29  
You may be able to back off the four bolts that hold the front axle assy. ,and then pry it away from the engine block about a 1/2 to 3/4 inch.
Block the tractor just in case



[Log in to Reply]  [No Email]
John S.

12-31-2003 07:13:43




Report to Moderator
 Re: Re: VAC-14 - NEED HELP in reply to mike's 600, 12-30-2003 19:16:05  
Im not an expert myself but if you can fit your hand in there then you should be able to fabricate a goofy wrench to fit it. I will go look on mine and see what I can come up with. On the other hand if you decide its to much of a pain let me know I need a good cheap parts tractor badly.



[Log in to Reply]  [No Email]
italy hill bill

12-31-2003 18:44:21




Report to Moderator
 Re: Re: Re: VAC-14 - NEED HELP in reply to John S., 12-31-2003 07:13:43  
John S. Thanks for the reply. Let me know what I may have to do to get to the bolt if you can. Will drop the front end if it is easy enough. Not sure if the assy will just drop out if I pull the bolts to the pivot support. Is the steering spindle splined to allow it to just pull out when the support is pulled? Or do I have a bearing and race nightmare to contend with? On a ligher note, if the problem cannot be fixed easily, the whole unit is for sale...

[Log in to Reply]  [No Email]
Bill Woods

12-31-2003 18:27:47




Report to Moderator
 Re: Re: Re: VAC-14 - NEED HELP in reply to John S., 12-31-2003 07:13:43  
I am going to try to do this thing but if it turns out to be a true nightmare - aka the bearings cannot be replaced w/o a major teardown, I will be in a position to sell. Gonna try to pull the pan and see what can be done. Damn engineers! Put a bolt where a mechanic cannot get to it!



[Log in to Reply]  [No Email]
Jim

01-01-2004 10:15:42




Report to Moderator
 Re: Re: Re: Re: VAC-14 - NEED HELP in reply to Bill Woods, 12-31-2003 18:27:47  
I have a 1954 VAC-14. I was hauling hay with it, and you probably know how those damn drum brakes don't always work right, and jumped over a tree stump and stuck the tierod into the oil pan. I removed the old studs one at a time and put 6-8" long studs in their place, then slid the front end out enough to remove the pan. I have a Kelly front end loader on mine. My VAC-14 didn't spin any bearings, but it sure ground 'em after 49 years of service. Right now it is in the shop for a complete major overhaul, about $1200 if you do it yourself.

[Log in to Reply]  [No Email]
Bill Woods

01-03-2004 05:22:51




Report to Moderator
 Re: Re: Re: Re: Re: VAC-14 - NEED HELP in reply to Jim, 01-01-2004 10:15:42  
Jim, thanks for the suggestion. As it turns out a friend of mine had the same idea, so now I have 2 identical thoughts. I am hoping that the bearings can be replaced w/o a full overhaul. The tractor is not worth all that work to me. Sounds like you use yours a lot more than I do. Mine is just a brush hog and wood hauler a few times a year. Hopefully, the damage is minor and I can just slip in some bearings and polish upthe journals. Presume the bearings are the old babbit style, which should allow me that freedom.

[Log in to Reply]  [No Email]
Jim

01-04-2004 08:37:35




Report to Moderator
 Re: Re: Re: Re: Re: Re: VAC-14 - NEED HELP in reply to Bill Woods, 01-03-2004 05:22:51  
Bill. The old bearing shells are babbit lined steel, a bit expensive(about $125 a set) but you can replace them without dropping the crank, I've done it in a day. I have one theory on my farm, which is if a tractor can't perform it's share of the work, it either gets fixed or sold. My little VAC-14 can't hold a candle to my 1031D, but she has given us 49 years of constant service doing just about anything. Good luck, and REMEMBER TO USE AT LEAST GR.5 BOLTS TO SPLIT IT, I FOUND OUT THE HARD WAY THAT GR.2 BEND EASILY.

[Log in to Reply]  [No Email]
Bill

01-06-2004 05:11:20




Report to Moderator
 Re: Re: Re: Re: Re: Re: Re: VAC-14 - NEED HELP in reply to Jim, 01-04-2004 08:37:35  
Hi Jim. Thanks for the note. I just got my tractor under a lean-to to work on it. It looks like I can drop the front axle system relatively easily, which will allow me to get that front pan bolt off. After that it should be simple to tell what needs to be done. Am I right to figure that replacing the bearings is just like on a car? Done that before. Can I expect to be able to emery the journal(s) that are seized up in order to get the babbit off them and then be able to reassemble w/o major problems??

[Log in to Reply]  [No Email]
Jim

01-08-2004 18:14:53




Report to Moderator
 Re: Re: Re: Re: Re: Re: Re: Re: VAC-14 - NEED HELP in reply to Bill , 01-06-2004 05:11:20  
Well, If the crank is excessivly scored, you will have to remove it. You can however, change bearings without dropping the crank just like in a car. Just make sure you use plenty of assembly lube when you put the new ones in, don't want to beat them up too bad.



[Log in to Reply]  [No Email]
Bill

01-09-2004 05:34:50




Report to Moderator
 Re: Re: Re: Re: Re: Re: Re: Re: Re: VAC-14 - NEED in reply to Jim, 01-08-2004 18:14:53  
Thanks. Will give her a try. Can still turn the crank with effort, so expect minimal crank damage. With my luck though....Anyway, now that the temps are below zero instead of in the 40's, this is the right time to start! Ouch..



[Log in to Reply]  [No Email]
Jim

01-09-2004 18:57:26




Report to Moderator
 Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: VAC-14 - N in reply to Bill, 01-09-2004 05:34:50  
Well, I hear you there, put my heater cab on yesterday and froze doing it.



[Log in to Reply]  [No Email]
Bill

01-10-2004 02:56:04




Report to Moderator
 Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: VAC-14 in reply to Jim, 01-09-2004 18:57:26  
Well, we have a "peeker" watching all this discussion. One of my friends sent a note saying that his uncle died under a tractor one winter. Something about freezing his big fat but to the ground and his friends did not find him til spring..I told hin I did not believe any of his relatives had friends....



[Log in to Reply]  [No Email]
Jim

01-10-2004 14:52:58




Report to Moderator
 Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: VA in reply to Bill, 01-10-2004 02:56:04  
Sounds like sombody spent too much time shoveling manure in the barn again!:)



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy