Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

VAC transmission and differential parts

Welcome Guest, Log in or Register
Author 
Stan

12-10-2003 21:41:30




Report to Moderator

I'm in need of a good source for parts for my 1951 VAC, transmission and differential for now. I would appreciate any reccomendations.
Thanks




[Log in to Reply]   [No Email]
Stan

12-11-2003 10:40:03




Report to Moderator
 Re: VAC transmission and differential parts in reply to Stan, 12-10-2003 21:41:30  
Wide Open, Because of the distance between here and there I will reluctantly have to pass on your generous offer. It sounds like others are interested, however. Thanks again,
Stan



[Log in to Reply]  [No Email]
Wide Open

12-11-2003 05:14:58




Report to Moderator
 Re: VAC transmission and differential parts in reply to Stan, 12-10-2003 21:41:30  
I have a complete transmission and rear end already taken off of a '46. Both are good, but may need a few new seals. I would let you have them for free if you want 'em. Where are you located? I am in MN.



[Log in to Reply]  [No Email]
Stan

12-11-2003 10:16:57




Report to Moderator
 Re: Re: VAC transmission and differential parts in reply to Wide Open, 12-11-2003 05:14:58  
Thanks for the folowup from wide open in MN. I am located in Greeley, Colorado. I appreciate your offer, will consider



[Log in to Reply]  [No Email]
Will- Mn.

12-11-2003 06:11:52




Report to Moderator
 Re: Re: VAC transmission and differential parts in reply to Wide Open, 12-11-2003 05:14:58  
Wide Open,

Hi there,i am interested also in the VAC rear end and transmission,i am about 30 miles east of St. Cloud Mn. i restored my 56 VAC and painted it,but there is a noise in the rear end,but Bruce has spoken up first,

Will-Mn.



[Log in to Reply]  [No Email]
Bruce Nelson

12-11-2003 05:43:09




Report to Moderator
 Re: Re: VAC transmission and differential parts in reply to Wide Open, 12-11-2003 05:14:58  
I would love to come and take that transmission off your hands if Stan doesn't want it. Where in Minnesota?? Thanks, Bruce



[Log in to Reply]  [No Email]
Wide Open

12-11-2003 17:00:13




Report to Moderator
 Re: Re: Re: VAC transmission and differential part in reply to Bruce Nelson, 12-11-2003 05:43:09  
40 Miles Northwest of St. Cloud MN near Belgrade. Where are you?



[Log in to Reply]  [No Email]
Bruce Nelson

12-11-2003 17:23:20




Report to Moderator
 Re: Re: Re: Re: VAC transmission and differential in reply to Wide Open , 12-11-2003 17:00:13  
Mr Open, I am in St. Croix Falls, WI. Thats about 80 miles east of St. Cloud. My son attends college in Moorhead. I attend a football game up there a couple times a year. The secretery of our threshing club has a farm near Garfield. I could get him to haul it if it needs to be done soon. Otherwise I can get there in a few weeks. I work in North Branch if that connects at all. Thanks for your offer and let me know if I should plan on picking it up. How can we load it?? Thanks, Bruce

[Log in to Reply]  [No Email]
Wide Open

12-12-2003 17:17:05




Report to Moderator
 Re: Re: Re: Re: Re: VAC transmission and different in reply to Bruce Nelson, 12-11-2003 17:23:20  
There is no hurry at all. It can sit as long as it wants. I take it that you only need transmission?
We can load it w/ my skidloader, or I have a tractor and loader too. Let me know when you want it. I still have the torque tube connected to the tranny. It also has a good hydraulic pump/belt pulley on the torque tube w/ tranny. If you want the whole thing you can take it all for $50, or If you just want the tranny you can have it for free, which is a really good deal. Let me know if you only want the tranny so I can get them seperated.

[Log in to Reply]  [No Email]
Bruce Nelson

12-13-2003 05:07:53




Report to Moderator
 Re: Re: Re: Re: Re: Re: VAC transmission and diffe in reply to Wide Open, 12-12-2003 17:17:05  
I will take it all. Please e-mail me with your phone and e-mail so I can get a go-n-get-it plan going. Thanks, Bruce



[Log in to Reply]  [No Email]
Bruce Nelson

12-13-2003 05:11:31




Report to Moderator
 Re: Re: Re: Re: Re: Re: Re: VAC transmission and d in reply to Bruce Nelson, 12-13-2003 05:07:53  
Wide Open, I didn't check the right box and my address was hidden. Please e-mail me at [email protected]
Thanks
Bruce



[Log in to Reply]  [No Email]
F-IT

12-10-2003 22:11:17




Report to Moderator
 Re: VAC transmission and differential parts in reply to Stan, 12-10-2003 21:41:30  
third party image

Stan:
Stan:

I just finished going through my rearend/differential/transmission on my '50 VAC. I replaced all the bearings and seals. I bought nearly every seal at NAPA, and the bearings were bought locally through a bearing supply house and also on the internet through A&W Bearing. Still I had $600 in parts. Some of those bearings are expensive, so be prepared.

If I can help with any other information, let me know.

Frank-in-Tallahassee
70D // 855 // VAC
[email protected]

[Log in to Reply]  [No Email]
Stan

12-11-2003 10:34:07




Report to Moderator
 Re: Re: VAC transmission and differential parts in reply to F-IT, 12-10-2003 22:11:17  
Thanks so much for the response and a chance to veiw your excellent web page. I have a larger problem than the bearings and seals, which will all have to be replaced. The two bull pinion and diffential slide gears are chewed up bad and must be replaced. Any ideas on sources.



[Log in to Reply]  [No Email]
F-I-T

12-11-2003 11:16:21




Report to Moderator
 Re: Re: Re: VAC transmission and differential part in reply to Stan, 12-11-2003 10:34:07  
Stan:

I don't much about the yards that are around Colorado (my daughter lives in Boulder), but VAC rearends are pretty plentiful, so I don't tihnk you'll have any problem. The other good news is that the parts aren't all that large and can be UPS'd so you can buy them from just about any vendor.

When I redid my '70' Diesel and now this Case, I used the YT classifies a lot when looking for parts. It was pretty surprising how many responses you get if you put out a "Wanted" ad. If you can find a complete rearend near you, it might be easier to check and reseal that one and just roll yours away.

If you need any ideas once you get into it, shoot me an e-mail. I pretty much had mine in pieces!

Frank

[Log in to Reply]  [No Email]
Jerry

12-11-2003 11:46:22




Report to Moderator
 Re: Re: Re: Re: VAC transmission and differential in reply to F-I-T, 12-11-2003 11:16:21  
Frank , My daughter is in Loveland Colorado.
Jerry



[Log in to Reply]  [No Email]
John Saeli

12-11-2003 04:56:32




Report to Moderator
 Re: Re: VAC transmission and differential parts in reply to F-IT, 12-10-2003 22:11:17  
Hey Fit; Looks like new!! Just for info: When I had my electrolsis going in plain well water, the amp draw was .7 amps. I set up a new 1 with baking soda and the amp draw was 1.5. Really bubbled.



[Log in to Reply]  [No Email]
F-I-T

12-11-2003 09:05:49




Report to Moderator
 Re: Re: Re: VAC transmission and differential part in reply to John Saeli, 12-11-2003 04:56:32  
John:

If you're using "Baking Soda" (Sodium BiCarbonate), you might be disappointed. It works much better to use Washing Soda (Sodium Carbonate), also called Soda Ash, or Arm & Hammer "Super Washing Soda" in the bigger yellow box than their baking soda product. I find mine in the laundry detergent aisle of the supermarket.

Frank



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy