Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

Need advice for David Brown Diesel, won't start.

Welcome Guest, Log in or Register
Author 
Yann Melcher

09-30-2006 18:34:00




Report to Moderator

I have a David Brown (I thinks it's an 850).

It has a 4 cylinder engine and worked great until recently.

I ran out of fuel. As suggested by others, I primed the fuel system , opened various points in the fuel system to bleed out air. Fuel come's out but still won't start.

I starts on ether but won't continu to run.

Fuel come's to each injector (in little spurts)
if I unplug the fuel line on side of injector.

And a little fuel also come's on small top line
of injectors also.

I did all I could (cleaned filters and more).

Any clue ? Please help ! Any help appreciated.

Thank you for reading.

Have a good day.

Yann

[Log in to Reply]   [No Email]
dwag

10-01-2006 06:30:19




Report to Moderator
 Re: Need advice for David Brown Diesel, won't star in reply to Yann Melcher, 09-30-2006 18:34:00  
Did you open the 2 bleeders on the inj pump? One on gov hsg and one on pump body, takes a 1\4 or 5\16 wrench.



[Log in to Reply]  [No Email]
Yann Melcher

10-01-2006 17:49:19




Report to Moderator
 Re: Need advice for David Brown Diesel, won't star in reply to dwag, 10-01-2006 06:30:19  

No I did not butI will do it now. thank you very much for the tip.



[Log in to Reply]  [No Email]
BCnT

09-30-2006 18:49:58




Report to Moderator
 Re: Need advice for David Brown Diesel, won't star in reply to Yann Melcher, 09-30-2006 18:34:00  
sounds like you still got air in system...give the starter a break and pull start it...it will bleed itself if you pull it long enuff.
make sure fuel valve is ''on'' as well as pump kill.



[Log in to Reply]  [No Email]
Yann Melcher

10-01-2006 17:53:36




Report to Moderator
 Re: Need advice for David Brown Diesel, won't star in reply to BCnT, 09-30-2006 18:49:58  
Thank you, I will give it a try.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy