Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

Won't Charge

Welcome Guest, Log in or Register
Author 
Patrick G Foley

11-18-2003 17:05:11




Report to Moderator

I have a case 311 that I converted to an alternator over three years ago that won't charge now.I replaced the alternator, belt and rewired it and it still won't charge. I even had the alternator rechecked and tried a different battery. I ran a wire from the battery post of the alternator to the positive post of the battery.seconly I ran a wire from the #2terminal of the alternatop to the positive post of the battery. Thirdly I ran a wire from the #1 terminal of the alternator to the ignition switch,which I ran through a indicator light.This wire only has power when the unit is running.It's been working for over three years this way and now I can't get it to charge. Got any ideas guys?
Thanks Pat

[Log in to Reply]   [No Email]
Doug in OR

11-19-2003 18:42:54




Report to Moderator
 Re: Won't Charge in reply to Patrick G Foley, 11-18-2003 17:05:11  
Check these things.....

1) Do you have enough RPM at the alternator? Usually you need about 1600 RPM at the alternator for it to start charging.

2) I am assuming that your are using a Delco 10SI or similar - if so, check that terminal 2 is securly wired to the BAT lug.

3) With the engine runnng at full RPM, put a voltmeter on pin 1 and the other lead to the frame. Do you have a solid 12 volts? If not, it is probably a connection problem. If you purchased a conversion kit and it included a diode, the diode might be defective if you have no voltage at pin 1.

4) Measure the voltage at the BAT lug on the alternator. With the engine running full throttle, you should have 14 volts. If you do, then your problem is probably a wiring issue.

One last thing, your ammeter might be defective. If it is, you will not have a current path to your battery.

[Log in to Reply]  [No Email]
Pat Foley

11-28-2003 16:02:29




Report to Moderator
 Re: Re: Won't Charge in reply to Doug in OR, 11-19-2003 18:42:54  
The problem was the RPM, had to go to a smaller pulley on the alt. Went from a 3.5" to a 2.5" pulley, now the alt. kicks in at a lower RPM. It still bothers me that it worked for 3 years with the 3.5" pulley. My auto parts buddy thinks they might of change the voltage regulator. It doesn't matter it works now, thanks for the help! Thanks Pat



[Log in to Reply]  [No Email]
Patrick Foley

11-20-2003 03:03:56




Report to Moderator
 Re: Re: Won't Charge in reply to Doug in OR, 11-19-2003 18:42:54  
Thanks Guys, I'll give it a try this weekend. Thanks Pat



[Log in to Reply]  [No Email]
Adam

11-18-2003 18:08:25




Report to Moderator
 Re: Won't Charge in reply to Patrick G Foley, 11-18-2003 17:05:11  
Sounds like you have it wired correctly, and the alternator was checked out by the parts guys?

Then I'd say what you must have a bad connection somewhere, corroded or over heated.

ABW



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy