Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

Need someone to recast parts

Welcome Guest, Log in or Register
Author 
DKase

11-16-2003 18:07:02




Report to Moderator

I hope to start working on an old Case tractor this winter and I will need to have some parts recast. I have found a very generous gentleman that will let me use the parts that I need off his tractor as patterns to have them recast. I am in Eastern SD. I don't dare risk shipping the parts so the craftsman must be within driving distance. I have heard there is a guy that does good work in Brandon MN. Do any of you guys know the guy, or how I can contact him. Any other leads would be appreciated. Thanks DKase

[Log in to Reply]   [No Email]
Casenut

11-17-2003 20:17:57




Report to Moderator
 Re: Need someone to recast parts in reply to DKase, 11-16-2003 18:07:02  
Hey DKase, did you get my e-mail about the trackson crawlers?



[Log in to Reply]  [No Email]
DKase

11-18-2003 06:15:39




Report to Moderator
 Re: Re: Need someone to recast parts in reply to Casenut, 11-17-2003 20:17:57  
10-4 I talked to him, and he has sent me pictures and information that I did not have. Thanks Much!



[Log in to Reply]  [No Email]
Monte (MN)

11-17-2003 09:00:53




Report to Moderator
 Re: Need someone to recast parts in reply to DKase, 11-16-2003 18:07:02  
The guy in Brandon is Ray Olson. I have his phone number as: (320) 524-2118.



[Log in to Reply]  [No Email]
DKase

11-18-2003 06:17:49




Report to Moderator
 Re: Re: Need someone to recast parts in reply to Monte (MN), 11-17-2003 09:00:53  
Thanks Monte! I will get in touch with him.



[Log in to Reply]  [No Email]
jal-SD

11-17-2003 05:54:59




Report to Moderator
 Re: Need someone to recast parts in reply to DKase, 11-16-2003 18:07:02  
DKase, where in eastern SD are you? I'm in Mitchell, we GOTTA get together sometime. (My $0.02 worth. jal-SD)



[Log in to Reply]  [No Email]
DKase

11-18-2003 06:20:26




Report to Moderator
 Re: Re: Need someone to recast parts in reply to jal-SD, 11-17-2003 05:54:59  
I'm about 25 miles North of Madison SD. I have your phone #, and I've been planning on stopping to see you next time I get time in Mitchell.



[Log in to Reply]  [No Email]
John Saeli

11-17-2003 05:04:17




Report to Moderator
 Re: Need someone to recast parts in reply to DKase, 11-16-2003 18:07:02  
Hey DCASE; What parts need recasting??



[Log in to Reply]  [No Email]
DKase

11-17-2003 05:39:54




Report to Moderator
 Re: Re: Need someone to recast parts in reply to John Saeli, 11-17-2003 05:04:17  
Steering linkage parts for the Case Trackson Crawler. Yes I would buy them from you if you had them!



[Log in to Reply]  [No Email]
John Saeli

11-17-2003 06:32:33




Report to Moderator
 Re: Re: Re: Need someone to recast parts in reply to DKase, 11-17-2003 05:39:54  
Hey DKASE; Wonder what I did with those extras I had??



[Log in to Reply]  [No Email]
DKase

11-18-2003 06:22:08




Report to Moderator
 Re: Re: Re: Re: Need someone to recast parts in reply to John Saeli, 11-17-2003 06:32:33  
You go dig through the scrap iron pile and I will call you when lunch is ready.



[Log in to Reply]  [No Email]
G. L. Perry

11-16-2003 22:11:34




Report to Moderator
 Re: Need someone to recast parts in reply to DKase, 11-16-2003 18:07:02  
I think I've seen ads in Antique Power magazine, but I don't see them now. I did find one in the sister mag Vintage Truck, but it's from Texas. MFT/USA in Canutillo, TX www.mft-usa.com for web site.



[Log in to Reply]  [No Email]
Brian in Ohio

11-17-2003 14:26:03




Report to Moderator
 Re: Re: Need someone to recast parts in reply to G. L. Perry, 11-16-2003 22:11:34  
If you go with MVT/USA, be sure to do a LOT of dishes and laundry first. That way when the bill comes, you'll have enough brownie points built up to keep you from having to sleep in the shop. I priced a manifold for my Case "C", and they quoted me $1500.00



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy