Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

Case SC steering wheel,

Welcome Guest, Log in or Register
Author 
Dave

11-06-2003 06:04:34




Report to Moderator

Hello,

I am looking for a Case SC steering wheel, The one on it is not the original.

If Mike Schotte reads this, I saw in pictures that you have posted that you may have one for sale. Maybe?
If not I am putting the feelers out for a steering wheel and a manual crank for starting.

Any suggestions would be appreciated.

Again, thanks to all who are helping me in my first adventure with my Case SC.

Dave

[Log in to Reply]   [No Email]
Dave

11-06-2003 14:43:15




Report to Moderator
 Re: Case SC steering wheel, in reply to Dave, 11-06-2003 06:04:34  
Hello,

Thanks to all who are helping me in my endevor.

I will keep on searching.

Dave



[Log in to Reply]  [No Email]
John Saeli

11-06-2003 14:03:36




Report to Moderator
 Re: Case SC steering wheel, in reply to Dave, 11-06-2003 06:04:34  
Hey Dave; Ebay # 2570272118. Good luck!



[Log in to Reply]  [No Email]
Mike Schotte

11-06-2003 09:17:34




Report to Moderator
 Re: Case SC steering wheel, in reply to Dave, 11-06-2003 06:04:34  
Hi Dave,

Sorry- but the pictures I posted are of a wheel I'm fixing up for my '49SC, and it's not for sale.

If you look at some of my OTHER photos- the previous owner welded on a Chevy van steering wheel!

I had to get a new steering column so I could finally get rid of it.

I have to admit- it's probably going to weird the first time I mow with the new wheel. That other wheel has been on there ever since I was a kid.

Don L. and CASEPOWER both sell repro wheels, and Minn-Kota recovers the frames of old wheels.

Congrats on getting an SC!

Here's a picture of the crank you're looking for:

third party image

And here's the drawing, too:

Case SC hand crank drawing

-Schotte

[Log in to Reply]  [No Email]
todd hamilton

11-06-2003 15:01:01




Report to Moderator
 Re: Re: Case SC steering wheel, in reply to Mike Schotte, 11-06-2003 09:17:34  
I would like to have a crank like that for mine. However, since I have a distributor and have converted to 12 volt I really don't need one. Couldn't resist!!! GRIN :) :) :) :)



[Log in to Reply]  [No Email]
Mike Schotte

11-06-2003 15:08:57




Report to Moderator
 Re: Re: Re: Case SC steering wheel, in reply to todd hamilton, 11-06-2003 15:01:01  
Todd,

I hate to tell you- but with a good magneto, you barely have to crank the crank. (back me up on this, John)

I'm astounded by how quickly and easy my tractor starts whenever I'm caught without a battery.

-S.



[Log in to Reply]  [No Email]
John Saeli

11-06-2003 16:35:41




Report to Moderator
 Re: Re: Re: Re: Case SC steering wheel, in reply to Mike Schotte, 11-06-2003 15:08:57  
Hey Mike; You know where I stand on CASE Mags. Ditto's & Kudo's to what you said.



[Log in to Reply]  [No Email]
todd hamilton

11-06-2003 15:18:13




Report to Moderator
 Re: Re: Re: Re: Case SC steering wheel, in reply to Mike Schotte, 11-06-2003 15:08:57  
Dad's SC had a mag and I could crank it when I was 10 years old - I just had to tease all you "mag guys" when I saw the picture of the crank. I an eletronic service engineer (for over 20 years now) so distributor service is easy for me. I cringe at mags not because of Dad's SC but because of his 75 HP Johnson on the boat. It had dual points and it was hard on points, condensors, and coils.



[Log in to Reply]  [No Email]
C. Amick

11-06-2003 09:05:55




Report to Moderator
 Re: Case SC steering wheel, in reply to Dave, 11-06-2003 06:04:34  
I saw a steering wheel up for auction on Ebay this week. I don't know whether or not it is still there. Mike Schotte did a really good drawing for fabricating an engine crank. He can probably email it to you.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy