TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Case Tractors Discussion Forum

Blast it all

Welcome Guest, Log in or Register

Author

Les...fortunate

10-31-2003 15:49:00

Report to Moderator

Sky and I discovered a busted valve spring on the SC tonight. Are new ones still available? I have emailed Don L. but wouldn't mind some input from the usual suspects.

[Log in to Reply] [No Email]

todd hamilton

10-31-2003 18:12:36

Report to Moderator

Re: Blast it all in reply to Les...fortunate, 10-31-2003 15:49:00

Don't let it get you down. Bad luck floats around and lands on us all from time to time. I told my wife that I would start remodeling the house after harvest. 2 weeks ago tomorrow (Sat) we finished shelling corn. That night my daughter pushed in one of the walls on the tiled shower and the remodeling thus began. I don't know whether to : ( or : )

[Log in to Reply] [No Email]

old school

10-31-2003 16:27:12

Report to Moderator

Re: Blast it all in reply to Les...fortunate, 10-31-2003 15:49:00

I put all new valves and springs in my head a few years back 126$ case parts.

[Log in to Reply] [No Email]

Les...Also

10-31-2003 15:50:58

Report to Moderator

Re: Blast it all in reply to Les...fortunate, 10-31-2003 15:49:00

Forgot to mention that the magneto needs help. Bunch of nigglin little things keeping that masheen from performing up to expected standards. All of those little things cost money, of course ":^(

[Log in to Reply] [No Email]

Sky

10-31-2003 17:02:18

Report to Moderator

Re: Re: Blast it all in reply to Les...Also, 10-31-2003 15:50:58

Your dejected?! I'm the one who has to pull the head! (let the the truth be known I think the whole thing rather a chuckle.Ha!) $126 sounds expensive but it would be money well spent. Amen.

[Log in to Reply] [No Email]

martin in De.

10-31-2003 18:20:58

Report to Moderator

Re: Re: Re: Blast it all in reply to Sky , 10-31-2003 17:02:18

Sky,if just need to change a valve spring,you donot have to pull the head just put some air pressure in the cylinder and replace the spring.

[Log in to Reply] [No Email]

Lester

11-01-2003 03:59:58

Report to Moderator

Re: Re: Re: Re: Blast it all in reply to martin in De., 10-31-2003 18:20:58

I bet I hadn't hardly got out of his dooryard and he had started to take that head off.
";^)

[Log in to Reply] [No Email]

Sky

11-01-2003 09:16:48

Report to Moderator

Re: Re: Re: Re: Re: Blast it all in reply to Lester, 11-01-2003 03:59:58

Your wrong Lester, I wistled Dixie, whitled a peg and paddled a canoe up the Rio Grand. Good guess.

[Log in to Reply] [No Email]

Mike Schotte

10-31-2003 17:13:50

Report to Moderator

Re: Re: Re: Blast it all in reply to Sky , 10-31-2003 17:02:18

Regarding those repair costs...remember- the Sky's the limit! (grin)

Seriously- hope the old girl is back on her feet soon. What kind of trouble are you having with the magneto, and which kind do you have on there?

-Schotte

[Log in to Reply] [No Email]

Les...Ooooo

10-31-2003 18:56:12

Report to Moderator

Re: Re: Re: Re: Blast it all in reply to Mike Schotte, 10-31-2003 17:13:50

Good one, Mike. The limit hasn't been reached yet. Maybe we otta pray for some bad weather so I can get some more overtime?

[Log in to Reply] [No Email]

Sky

10-31-2003 17:35:06

Report to Moderator

Re: Re: Re: Re: Blast it all in reply to Mike Schotte, 10-31-2003 17:13:50

We have a WICO model X spec. XH-3001
ser. 2-181505

We need a coil, the contact point on the origonal one broke, wore, or whatever off. Any help would be apprieciated, Lester and I are new at this.

[Log in to Reply] [No Email]

Jake

10-31-2003 18:01:12

Report to Moderator

Re: Re: Re: Re: Re: Blast it all in reply to Sky, 10-31-2003 17:35:06

Wico X magneto parts are available from all over.
They still make NEW Wico X magnetos today.

[Log in to Reply] [No Email]

Calling Glen in TX...

10-31-2003 17:38:16

Report to Moderator

Re: Re: Re: Re: Re: Blast it all in reply to Sky, 10-31-2003 17:35:06

Sorry, I don't have any knowledge (or parts) for the WICO mags (yet.)

I bet ol' Glen Schueler will be along directly to help you out, though...

-Schotte

[Log in to Reply] [No Email]

sky

10-31-2003 18:37:41

Report to Moderator

Re: Re: Re: Re: Re: Re: Blast it all in reply to Calling Glen in TX..., 10-31-2003 17:38:16

Thank you all, I have just filled out an order form for a new coil. I am not down hearted at all, I just say "if Lesters money can fix it there's no problem." It was no big deal to pull the head, the tractor is only half assembled any way.

[Log in to Reply] [No Email]

Glen in TX

10-31-2003 22:21:48

Report to Moderator

Re: Re: Re: Re: Re: Re: Re: Blast it all in reply to sky, 10-31-2003 18:37:41

Ok, I'm back. Sounds like you may have got fixed up on the mag. If not let me know. Have all parts for the Wico and others and copies of magneto service manuals for different models and makes for you do-it-yourselfers too. Or if you got a question just ask. Good luck.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy