Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

Tractor parts for Trick-or-Treat!

Welcome Guest, Log in or Register
Author 
Mike Schotte

10-31-2003 15:17:50




Report to Moderator

I haven't bought any candy yet for tonight's trick or treaters... do you think I could get by giving out tractor parts instead?

If the person that came to the door looked like a good kid, I could give 'em some old CASE stuff...but I they looked like a bad seed- I could get rid of some of those old green John Deere parts that I'm trying to get out of the yard!

What do you think?

-Schotte




[Log in to Reply]   [No Email]
Dan in Ore

11-01-2003 06:21:52




Report to Moderator
 Re: Tractor parts for Trick-or-Treat! in reply to Mike Schotte, 10-31-2003 15:17:50  
They would have to be a special kind of bad to give them John Deere parts. If you are giving out Case stuff then I will be at your door next Halloween.



[Log in to Reply]  [No Email]
Glen in TX

10-31-2003 22:31:07




Report to Moderator
 Re: Tractor parts for Trick-or-Treat! in reply to Mike Schotte, 10-31-2003 15:17:50  
I knew I went trick or treating at the wrong places tonight. :)



[Log in to Reply]  [No Email]
Dr Cy Kosis

10-31-2003 18:21:01




Report to Moderator
 Re: Tractor parts for Trick-or-Treat! in reply to Mike Schotte, 10-31-2003 15:17:50  
Don't be mean to the little T-Treaters.

You make the li'l farts mad, and they'll put some John Deere parts in a paper bag on your porch, light it, ring the door bell and run.

If you find a burning bag on the porch, I'd recomend using the extinguisher followed by a flat point shovel...oh,....and be sure and throw it in the neighbors yard.



[Log in to Reply]  [No Email]
Les...fortunate

10-31-2003 15:45:23




Report to Moderator
 Re: Tractor parts for Trick-or-Treat! in reply to Mike Schotte, 10-31-2003 15:17:50  
If I came and knocked on yer door would you give me a valve spring for that SC? Just discovered a busted one tonight :(



[Log in to Reply]  [No Email]
Mike Schotte

10-31-2003 17:00:21




Report to Moderator
 Re: Re: Tractor parts for Trick-or-Treat! in reply to Les...fortunate, 10-31-2003 15:45:23  
Hey Les,

I'd loan you one... but I'd need it back. (and we'd have to go and take it off of a cylinder head....

I'm may wind up breaking one myself- trying to unstick that #3 valve.

Sorry, to Gene- but I don't have any "pre-flambeau" parts...

Heck, the only reason I have any John Deere parts is because they were FREE and they were painted the color of money... (grin)
-S.



[Log in to Reply]  [No Email]
royjoebob

10-31-2003 17:27:02




Report to Moderator
 Re: Re: Re: Tractor parts for Trick-or-Treat! in reply to Mike Schotte, 10-31-2003 17:00:21  
third party image

Mike, Was it not you who I saw sometime ago with Mr. Magic derusto super solvent? I just bought a VAO with lots of surface rust and was trying to remember where I saw the it on here. If it is you.. could you put some in my trick or treat bag?

Thanks Much

[Log in to Reply]  [No Email]
ff316

10-31-2003 17:55:23




Report to Moderator
 Re: Re: Re: Re: Tractor parts for Trick-or-Treat! in reply to royjoebob, 10-31-2003 17:27:02  
Here's a link to F-I-T's restoration tips page detailing the electrolysis and lye gravy methods. I think you could do those fenders and other sheet metal in a kiddie pool using the electrolysis method. Good luck.

Fireman in KY



[Log in to Reply]  [No Email]
It was me...

10-31-2003 17:34:51




Report to Moderator
 Re: Re: Re: Re: Tractor parts for Trick-or-Treat! in reply to royjoebob, 10-31-2003 17:27:02  
Hi royjoebob,

I just saw your tractor in the photos today. I sure do like those fenders... hadn't ever seen that type on a VA series before.

When I'm not doing the electrolysis thing (F-I-T has got a great site for that and the "lye gravy" method)... I'm using a product called Evapo-Rust.

I just did some fender U-bolts and an SC dashboard this last week. I wish I had taken a before and after picture of that starter switch- it was pretty far gone. Now, it's bare shiny metal.

The parts don't look that great until you take 'em out and wash the rust off. Then, they're a dull metal color. Hit them with a wire wheel and they shine up like a new nickel.

Keep the pictures coming on your tractor...looks like a neat project!

-Schotte

[Log in to Reply]  [No Email]
royjoebob

11-01-2003 09:03:56




Report to Moderator
 Re: Re: Re: Re: Re: Tractor parts for Trick-or-Tre in reply to It was me..., 10-31-2003 17:34:51  
third party image

Thanks for the links and the info Mike and ff316... the fenders were the selling point on this little tractor. It has all the pre drilled holes in them for the full orchard tin.. now I need to find that elusive tin. It should be a fun project.. (I think). This will be my first paint and restoration job. Already have parts coming from all over the country for it. You oughta see the steering wheel... someone had a bad sense of humor. Also not a good idea to let your John Deere buddies near your tractor or they might misspell some things...

[Log in to Reply]  [No Email]
Mike Schotte

11-01-2003 17:07:46




Report to Moderator
 Re: Re: Re: Re: Re: Re: Tractor parts for Trick-or in reply to royjoebob, 11-01-2003 09:03:56  
That's great!

If you part with that steering wheel, let me know!

-Schotte



[Log in to Reply]  [No Email]
Geo.

10-31-2003 17:50:34




Report to Moderator
 Re: Re: Re: Re: Re: Tractor parts for Trick-or-Tre in reply to It was me..., 10-31-2003 17:34:51  
Hey, I don't know much bout tractors, but with rust there's some stuff call"POR-15". I have had alot of luck with it. Get the scales off and git brush'n. Goes a long way too.



[Log in to Reply]  [No Email]
TomRailsback

10-31-2003 15:35:27




Report to Moderator
 Re: Tractor parts for Trick-or-Treat! in reply to Mike Schotte, 10-31-2003 15:17:50  
I could get lots of intertrashunal parts real easy.



[Log in to Reply]  [No Email]
Gene Dotson

10-31-2003 15:29:24




Report to Moderator
 Re: Tractor parts for Trick-or-Treat! in reply to Mike Schotte, 10-31-2003 15:17:50  
Trick or treat, Mike. I need a set of good fenders for a 1931 "C", and I am a good kid!!!!! Gene



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy