Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

730 #741 830 engine fit?

Welcome Guest, Log in or Register
Author 
Steve Damman

10-31-2003 14:51:11




Report to Moderator

Working on a 730 Confort King Model # 741, Serial 8273813 which had stuck piston. Would consicer complete replacement engine and was told by one source an 830 engine would bolt in the tractor. Can anyone confirm? How do the 730/830 bore/stroke compare? What is availability of ring and bearing overhaul kit? Any information appreciated.




[Log in to Reply]   [No Email]
Thad

10-31-2003 16:04:04




Report to Moderator
 Re: 730 #741 830 engine fit? in reply to Steve Damman, 10-31-2003 14:51:11  
The 830 eng will fit right in. It is a 301 if diesel 4 3/8 bore the stroke is the same on all. As far as parts easy to get. The 730 is 4 1/8 bore on the diesel and is 267 cubes. Thad



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy