Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

SC Case vs. H Farmall

Welcome Guest, Log in or Register
Author 
Mike Schotte

10-14-2003 16:30:36




Report to Moderator

I've really enjoyed the thread below comparing the Case DC to the Farmall M.

Can anybody here compare the "little brothers" by telling us about the SC versus the H?

-Schotte




[Log in to Reply]   [No Email]
steve

10-25-2003 23:45:07




Report to Moderator
 Re: SC Case vs. H Farmall in reply to Mike Schotte, 10-14-2003 16:30:36  
sc's, dc's are great tractors but i'll stick with my h, she's retired now and almost ready for showin



[Log in to Reply]  [No Email]
K-Mo

10-15-2003 17:55:52




Report to Moderator
 Re: SC Case vs. H Farmall in reply to Mike Schotte, 10-14-2003 16:30:36  
I grew up on a SC and have also had many hours on an H.

CASE: 1. With the hand clutch a six year old could cultivate corn. 2. Good weight distribution. Was good for pulling out a stuck H.

H: 1. Very easy to operate after my legs were long enough the to reach the pedals. 2. Could turn on a dime. 3. Higher speed roadgear.

Both are good tractors. Each did better in some applications than the other. The only thing I didn't like about the SC was the chicken roost not letting me make short turns like I could with the H.

K-Mo

[Log in to Reply]  [No Email]
C. Amick

10-15-2003 10:14:07




Report to Moderator
 Re: SC Case vs. H Farmall in reply to Mike Schotte, 10-14-2003 16:30:36  
A neighbor had a set of trail plows that he said his Farmall H wouldn't pull. My SC will pull them in 2nd. gear. This is probably not a fair comparison, I think there may be something wrong with his Farmall.



[Log in to Reply]  [No Email]
dctom42

10-15-2003 11:08:24




Report to Moderator
 Re: Re: SC Case vs. H Farmall in reply to C. Amick, 10-15-2003 10:14:07  
NAH NOTHING WRONG WITH IT JUST NORMAL FOR A STOCK H LMAO DCTOM



[Log in to Reply]  [No Email]
todd hamilton

10-14-2003 20:28:24




Report to Moderator
 Re: SC Case vs. H Farmall in reply to Mike Schotte, 10-14-2003 16:30:36  
I am the old bush puller. The field length cut my name off when I posted the message below. Need any bushes pulled out???



[Log in to Reply]  [No Email]
old bush puller a.k.a. to

10-14-2003 20:25:07




Report to Moderator
 Re: SC Case vs. H Farmall in reply to Mike Schotte, 10-14-2003 16:30:36  
It is important to remember that the SC was designed to be a "handy" tractor for it's time and not a puller. They have a very heavy rear-end for an 18-20 horsepower tractor and if you can get the rear tires to spin you are probably straining the engine and clutch pretty hard. This I know from pulling bushes with mine and farming with Dad's when I was a kid. Stock SCs don't rev very high RPMs with the governor either. The SC was designed to give an even pull under load in changing conditions. The IH torque amplifier was invented to keep from stopping and shifting so much. Having plowed with both I can tell you that you had to "pull the torque back" a lot more on the IH than you had to stop the SC and shift from 2nd into 1st. BTW I know that H models did not have TA - introduced on the 300s in 1956. Our extended family usually bought and still has IH tractors and I have spent a lot of time on all of them. None of them shift into gear as well as my 1944 SC Case.

[Log in to Reply]  [No Email]
John Saeli

10-14-2003 18:22:16




Report to Moderator
 Re: SC Case vs. H Farmall in reply to Mike Schotte, 10-14-2003 16:30:36  
OK Men!! I've got a real nice "H" and several "SC's". The "H" has no low end torque when compared to the "SC". "SC" has self actuating disc brakes, the "H" antiquated band brakes. THE "SC" uses roller bearings in the rear end, the "H" uses antiquated ball bearings, and if one gets loose it puts a hole in the rear housing. In '52 the SC had live PTO & Hyd, 3pt hitch, the "H" never had it. The hydraulics stink on the "H". You guys are wrong about the "SC" not being able to pull. During WWII, the military chose the "SC" over other competitors just because of it's weight to drawbar pull. I don't want to play favorites with my own tractors, Heaven forbid!!. Just stating the facts.

[Log in to Reply]  [No Email]
CASEPOWER

10-14-2003 18:53:00




Report to Moderator
 Re: Re: SC Case vs. H Farmall in reply to John Saeli, 10-14-2003 18:22:16  
All of the military S tractors were gas and not all fuel at least I have never seen one that was all fuel.



[Log in to Reply]  [No Email]
John H-WI

10-14-2003 18:44:54




Report to Moderator
 Re: Re: SC Case vs. H Farmall in reply to John Saeli, 10-14-2003 18:22:16  
John, as I said in my post they are a darn good work tractor and I speak from much experience but they are not a tractor to take to a pulling contest. Too heavy for the light weights and not enough horses for the heavier weight. I speaking from experience on this.



[Log in to Reply]  [No Email]
dctom

10-14-2003 19:03:29




Report to Moderator
 Re: Re: Re: SC Case vs. H Farmall in reply to John H-WI, 10-14-2003 18:44:54  
I agree, SC would out work an H and go where an H would fear to go but on the track too heavy for the horse, always thought one could be made to out pull thoes mean H"s with just a little work but no one seems to want to do it dctom



[Log in to Reply]  [No Email]
CASEPOWER

10-14-2003 16:36:07




Report to Moderator
 Re: SC Case vs. H Farmall in reply to Mike Schotte, 10-14-2003 16:30:36  
To easy Case wet sleeve, H not. Case wet clutch, H not. Case tough rear, H not. Case tough tranny, H not. That enough for me right there. but if you get in the later years eagle hitch was much better.



[Log in to Reply]  [No Email]
Mike Schotte

10-14-2003 16:39:52




Report to Moderator
 Re: Re: SC Case vs. H Farmall in reply to CASEPOWER, 10-14-2003 16:36:07  
I'd be interested in hearing what the horsepower/pulling comparisons are between the two tractors.

As you know, the SC is a personal favorite of mine... but I've only ever seen one SC at a tractor pull... and it did mighty poorly.

-S.



[Log in to Reply]  [No Email]
John H-WI

10-14-2003 18:09:13




Report to Moderator
 Re: Re: Re: SC Case vs. H Farmall in reply to Mike Schotte, 10-14-2003 16:39:52  
Hey guys, take it from someone who spent many hours on the cold seat of an SC, they are/were one good tractor for farming but they are NOT a good pulling tractor. The weight to power ratio isn't there. The H could probably be made to pull better. If I had to do something about pulling I would go with the DC or VAC or even a CC. All of our SC's were strictly gas, never had any of the dual fuel or whatever else they ran on. Our neighbor had an H that was overhauled and bored out and he could pull a chopper with it. Was a pain to do as he didn't have live power. Finally got a DC4, foot clutch and live power to do the chopping with. Made for one happy neighbor. Would love to have some of our SC's back.

[Log in to Reply]  [No Email]
CASEPOWER

10-14-2003 17:09:02




Report to Moderator
 Re: Re: Re: SC Case vs. H Farmall in reply to Mike Schotte, 10-14-2003 16:39:52  
Mike what I have ran into is most of the SC tractors were all fuel and most of the H pullers are straight gas and have higher compression. Take a stock H with a distillant head out to the track and it will power out to. It don't take much to make a SC pull good, but if it has a low comp. head it's just not going to do much for its weight.



[Log in to Reply]  [No Email]
Paul f

10-14-2003 16:52:38




Report to Moderator
 Re: Re: Re: SC Case vs. H Farmall in reply to Mike Schotte, 10-14-2003 16:39:52  
At an auction last year an elderly ex farmer commented on the SC up for bid...
"It doesn't have the power to pull the hat off your head" Cases weren't real common around here :-)
Note: This is not my opinion only a quote



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy